您要查找的是不是：
- notched tensile strength 缺口抗拉强度
- notch tensile strength 切口拉伸强度
- Polypropylene shows a high mechanical strength, tensile strength, but a low notched impact strength, PP resists stress cracking and it is easy to weld. 聚丙烯具有高刚性，高硬度和高强度，但缺口冲击韧性一般。
- The heat treatment improves the tensile strength. 热处理能提高抗拉强度。
- Used to measure tensile strength of bundle flax. 用于测定亚麻之打成束纤维的断裂强力。
- Concrete bending tensile strength test machine. 混凝土抗折机。
- Tensile strength middle value is Min. 抗张强度:中间值最小。
- Its tensile strength is above 2000MPa. 以回火状态使用,抗拉强度达2000MPa以上。
- Besides these, the tensile strength and notch impact strength of the alloy of these copolyesters with PC was also concerned. 研究了该共聚酯与聚碳酸酯合金体系的相容性,测试了合金的冲击强度和拉伸强度。
- The tensile strength,yield strength and notch toughness of Q420 angle steel produced by V-N interalloying method were improved evidently and integration properties were better. 采用加入V-N中间合金方法生产的Q420角钢的抗拉强度、屈服强度和冲击韧性明显提高,具有较好的综合性能。
- To measure tensile strength and breaking elongation of single yarn. 测定单根纱线的抗拉断裂强力断裂伸长。
- To measure tensile strength and breaking elongation of single yard. 测定单根纱线的抗拉断裂强力和断裂伸长。
- The effect of the nano-meter Ti-alloy particle on the tensile modulus, tensile strength, elongation at break, notched impact strength and yield strength of the compositie was also studied. 研究了钛合金粉体对复合材料拉伸模量、拉伸强度、断裂伸长率、冲击强度及屈服强度的影响。
- Michel: Ever hear of tensile strength? Hooke's Law of Elasticity? 听说过抗张强度吗?胡克弹性定律.
- OUR MICRO-FIBER WIPER IS MADE VERY SOFT AND HIGH TENSILE STRENGTH. 敝公司专门生产无尘擦拭布，适用于精密电子或光学产品，如电子零件、动元件、C产品擦拭使用。
- Cast iron cannot compare with steel in tensile strength. 铸铁在抗张强度方面比不上钢。
- Wood wool slabs. Measurement of transverse tensile strength. 木丝板。横向拉伸强度试验。
- Standard forms for concrete bending tensile strength test cube. 混凝土抗折试模。
- Easy-to-handle due to its great tensile strength, good flexibility. 拉力强度高,柔韧性好使操作得心应手。
- The results showed the Izod notched impact strength of the modified PMMA increased with the increase of the content of ACR, while the tensile strength and bending strength decreased. 结果表明，随着ACR用量的增加，改性PMMA的缺口冲击强度不断增加，而拉伸强度和弯曲强度则成下降趋势。
