您要查找的是不是:
- notch bar impact strength 有缺口冲击值
- notched bar impact strength 冲击韧性值
- Test Methods for Notched Bar Impact Testing of Metallic Materials 金属材料切口冲击试验的试验方法
- Standard Test Methods for Notched Bar Impact Testing of Metallic Materials 金属材料切口试棒的冲击试验方法
- Besides these, the tensile strength and notch impact strength of the alloy of these copolyesters with PC was also concerned. 研究了该共聚酯与聚碳酸酯合金体系的相容性,测试了合金的冲击强度和拉伸强度。
- Testing of metallic materials; notched bar impact test; special forms of test pieces and methods of evaluation 金属材料的检验。缺口冲击韧性试验。特殊试样形式和评估方法
- Notch impact strength of the all three filled UHMW PEs decreases, when the filler content is less than about 15 volume percent, the low temperature impact strength is still maintained high. 填充三种填料后,冲击强度都有所下降,但当含量控制在15%25以内时,还具有较高的低温冲击性能。
- The testing results indicate that nanosized particles are uniformly located within bulk nanoplastics, and laser powers can strongly affect the HRL and notch impact strength of nanoplastics. 试验结果表明,纳米粒子均匀地分散在纳米塑料中,激光功率对纳米塑料的洛氏硬度及缺口抗冲击强度有显著影响。
- notched bar impact test 缺口冲辉验,凹口冲辉验
- High impact strength with good processability, high stiffness. 高冲击强度,良好的加工稳定性,阻隔性强。
- Excellent Impact strength, Excellent resostamce to low temp. 冲击性优抗低温度。
- Recommended for the formulations of powders with good impact strength. 用于生产高强度粉状涂料。
- The impact strength and the flame retardancy of the composites were tested. 并对复合材料的冲击强度、阻燃性能进行了测试。
- In general, a greater impact strength is required for more demanding, harder-to-cut materials. 一般来说,一个更大的影响力需要采取更为严格、艰苦地降低原料。
- However, always using higher impact strength diamond that is more expensive will not always benefit the operator. 总是用金刚石冲击强度更高,更加昂贵永远不会惠及经营。
- The monitor is really a notch above us. 班长确实比我们略胜一筹。
- The ability of a diamond to withstand an impact load is typically referred to as diamond impact strength. 能否经受冲击负荷的钻石通常称为金刚石冲击强度。
- The testresults of impact strength, hardness, adhesive force of the cured layer showed thispolyester had better properties. 对固化膜的冲击强度、硬度及附着力等性能的测试结果表明,所合成的光敏不饱和聚酯的性能较好。
- The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength. 切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
- He cut a notch in the stick with a sharp knife. 他用利刃在棒上刻了一个凹痕。