您要查找的是不是:
- Normal force of the total weight of the payload and the carriage. 载荷与支架总重的法向力。
- The origin of the normal force is similar to the origin of tension in a string. 法向力的起源与绳子上的张力的起源相似。
- Three main problems caused by normal force when linear motor was used in machine tool were presented. 发现了法向吸力在直线电机的实际应用中导致的推力波动问题、装配问题和机床隔磁问题。
- Enhancement of the vortical effect can benefit both the side force and the normal force. 涡系诱导作用增强,对侧向力和法向力都有增值。
- When considering external asperity, friction coefficient decreases with increase of follow deformat and normal force. 考虑表面微凸时,摩擦系数随着变形量的增加,法向压力的增加,摩擦系数呈现下降的趋势;
- For sliding contact, the coefficient of kinetic friction Uk is defined as the ratio of the frictional force to the normal force. 滑动接触时,动摩擦系数Uk的定义是摩擦力与法向力的比率。
- The relationship between the contact normal force, area of tire footprint, and footprint of tire under different radius of drum was discussed. 分析了轮胎在不同转鼓半径下的接触法向力、接触面积和接触印痕之间的关系。
- The relation between deformation of bar under normal force and node displacement is analyzed and applied to setting up compatibility equations of deformation for statically indeterminate problems. 摘要分析了轴向拉压杆件的变形与杆端结点位移之间的关系,并将其应用于拉压超静定问题变形协调方程的建立。
- The authors recommend the selected values of the air drag coefficient of ships, in addition to the approximate formula for the longitudinal positions of the action point of the normal force. 文章对试验结果进行了初步的分析比较,提出了水面船舶空气迎面阻力系数的取值范围及法向力作用点前后位置的近似计算公式,供读者参考。
- Based on the Hertz Contact Theory which the cylinder was only acted by the normal force, the problem that the cylinder was contacted with the plane in the normal force and a little torque was studied. 在仅作用有法向载荷的赫兹接触理论的基础上,对同时作用法向载荷及小的转矩的圆柱与平面的接触问题进行了研究。
- Since the maximum driving friction force is proportional to contact normal force and frictional coefficient, the skidding occurs at the smaller normal force and frictional coefficient. 研磨轴对滚珠的驱动摩擦力与接触正向力、磨擦系数两者成正比,理论上其值愈大,愈不利于滑动发生。
- On the basis of that the diamonds distribute in the impregnated bit homogeneously, the ar-ticle calculates the cutting depth and the normal force on the protrusion diamond on the crown. 本文以金刚石在孕镶钻头中均匀分布为基础,从理论上推导出唇面径向不同位置的金刚石切深、受力。
- The calculated results of "lift &normal force" source term model were compared under the same conditions with the calculated results and experimental data for a full gridded vane vortex generator. 在相同计算条件下,对“升力-法向力”源项模型计算结果和全网格计算结果及实验数据进行比较。
- The continuous beam is decomposed into simply supported beams with the end moment.According to the uniform deforming curve of isolated units, the equation of tangent and normal force is established. 摘要将连续梁分解成有端弯矩作用的简支梁,根据分离体挠曲变形协调,建立界面切向力与法向力的关系方程;
- The finite element method was used to model situations where an indenter applies normal forces to a coated or uncoated aluminum substrate. 应用有限元法对由压头向涂层或未涂层铝基体施加正压力的情况进行模拟。
- The computer has a normal qwerty keyboard. 这台计算机有标准的英文键盘。
- Objectie. To compare the rate of respiratory decline using percent normal forced ital capacity (%FC) measurements before and after posterior spinal fusion. 目的.;使用目前常用的用力肺活量(FC)指标来判断脊柱后路融合手术后呼吸功能的降低情况。
- Objective. To compare the rate of respiratory decline using percent normal forced vital capacity (%FVC) measurements before and after posterior spinal fusion. 目的.;使用目前常用的用力肺活量(FVC)指标来判断脊柱后路融合手术后呼吸功能的降低情况。
- Our relationship has been normalized. 我们的关系正常了。
- The situation has returned to normal in the city. 这座城市的局势已恢复正常。