您要查找的是不是:
- normal pressure angle 正常压力角
- This experiment can be done under normal pressure. 这个实验在常压条件下进行即可。
- To put(gas or liquid) under a greater than normal pressure. 用大于正常压力对(气体或液体)施压
- At normal pressures steam condenses at 100℃. 在正常的压力下,蒸气在摄氏100°时凝结成液体。
- Eventually, the hose springs a leak or ruptures under normal pressure. 最后在正常压力下热水管产生裂缝或破裂.
- At normal pressures steam condenses at 100oC. 在正常压力下,水蒸气在摄氏100度时凝结。
- Generally, standard gear hobs are only used to machine gears with the same modul, pressure angle as hobs themselves. 在一般条件下,标准齿轮滚刀只能加工与其模数、压力角相同的同制齿轮。
- Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built. 且建立该凸轮机构之各项特性分析的数学模式,包括压力角分析、曲率分析、运动静力分析,及推导系统输入扭矩表示式。
- The results indicate that the formation of calcium silicate hydrate is difficult at normal pressure. 结果表明,在常压下除硅,难以形成水合硅酸钙。
- This paper deals with measuring the diameter of addendum circle for a involute spur cylindrical gear and calculating and determining its mode number and pressure angle. 本文阐述了渐开线直齿圆柱齿轮齿顶圆直径的测量与齿轮模数、变位系数、压力角等参数的确定方法和步骤.
- After reaching the normal pressure, switch off and take down nozzle jet and plug to end inflation. 当到达正常气压后,切断启动开关,取下气嘴及插头,充气完成。
- It is confirmed that the sinusoidal gear can be easily undercut with a specific addendum height value decided only by the design pressure angle of the gear. 经讨论和仿真证实;正弦齿条所生成的齿轮在一个特定的齿顶高下最容易发生根切;该齿顶高数值只取决于正弦齿轮的设计压力角.
- Economic: Keep car tire normal pressure at any time to save petroleum, protect tire and guarantee safety. 节省花费:汽车轮胎随时保持正常胎压,可节省汽油、保护轮胎、并确保行车安全。
- With cylindrical coordination,this paper establishes the contour surface equations and pressure angle formula of the conical grooved cam with translating conical roller follower. 借助柱面坐标,建立了圆锥滚子直动从动件圆锥槽凸轮的廓面方程和压力角公式。
- Being operated in normal pressure and decompression,It especiall is more marked. 特别是在常压减压操作时更为显著。
- In accordance with the characters of end section involute of helicoids,it is analyzed of change of the base circle affecting the pressure angle of involute profile. 依据渐开螺旋面端面渐开线的性质,分析了渐开线基圆变化对渐开线齿形压力角影响。
- The process of melting HNS by blowing NH3 under normal pressure requires moderate content of [O],[S] in molten metal. 吹NH3条件下,钢液中保持一定量的氧、硫表面活性元素,有利于氮的吸收。
- Objective:To explore nosogenesis operative indication and opportunity of normal pressure cranial hydrocephalus. 目的:探讨正常压力性脑积水的发病机理、手术指征及手术时机。
- The preparation of trimesic from mesitylene by air in a liquid-phase oxidation under normal pressure was studied. 介绍以均三甲苯为原料,采用液相空气氧化法制取均苯三酸的工艺方法。
- It deduces the function between friction and normal pressure using in steel wire rope in its tunnel. 推导出了钢丝绳在绳道中摩擦力与正压力的关系式;