您要查找的是不是:
- normal pressure distribution 法向压力分布
- This experiment can be done under normal pressure. 这个实验在常压条件下进行即可。
- To put(gas or liquid) under a greater than normal pressure. 用大于正常压力对(气体或液体)施压
- At normal pressures steam condenses at 100℃. 在正常的压力下,蒸气在摄氏100°时凝结成液体。
- Metal lacing eyelets for optimum fastening and pressure distribution. 最好加速和减压的金属网状小孔。
- Eventually, the hose springs a leak or ruptures under normal pressure. 最后在正常压力下热水管产生裂缝或破裂.
- At normal pressures steam condenses at 100oC. 在正常压力下,水蒸气在摄氏100度时凝结。
- This curvature of the flow field alters the pressure distribution and the aerodynamic forces from their values in translational flight. 流场的弯曲使压力分布和空气动力与直线飞行时的值相比发生了变化。
- In addition, the effect of startup pressure gradient of Bingham fluid in stratum pressure distribution are analyzed. 分析了宾汉流体的启动压力梯度对地层压力分布的影响。
- The results indicate that the formation of calcium silicate hydrate is difficult at normal pressure. 结果表明,在常压下除硅,难以形成水合硅酸钙。
- The analysis of the hydrostatic pressure distribution is beased on the momentum exchange equation of varying mass. 在动量恢复方程的基础上,分析了主流道的静压分布。
- In this paper, pressure distribution of gaseous slip flow in parallel plates microchannel was studied. 对平行平板微型槽中气体滑移流动的压强分布特性进行了研究。
- After reaching the normal pressure, switch off and take down nozzle jet and plug to end inflation. 当到达正常气压后,切断启动开关,取下气嘴及插头,充气完成。
- For the PTD flow field, this thesis first presents inviscid flow solution of evolved pressure distribution. PTD内部流场问题,先不考虑黏性进行计算,并讨论PTD内部在不同时间的压力分布。
- Economic: Keep car tire normal pressure at any time to save petroleum, protect tire and guarantee safety. 节省花费:汽车轮胎随时保持正常胎压,可节省汽油、保护轮胎、并确保行车安全。
- Flue gas flow model is established based on gas flow to research the pressure distribution along the width of furnaces. 运用气体流动相关知识,建立炉气流动模型,研究沿炉宽方向上的压力分布。
- Being operated in normal pressure and decompression,It especiall is more marked. 特别是在常压减压操作时更为显著。
- The results show that the pressure distribution on external surface at both windward and leeward is basically the same. 结果表明:车体迎风面及背风面表面压力分布规律基本一致,验证了数值模拟计算模型的准确性;
- The process of melting HNS by blowing NH3 under normal pressure requires moderate content of [O],[S] in molten metal. 吹NH3条件下,钢液中保持一定量的氧、硫表面活性元素,有利于氮的吸收。
- Firstly,the pressure distribution of gas solid flow along the circulating route is analyzed and experimentally studied. 分析气固两相流在循环路径中的压力分布,并通过试验对其进行了研究。