您要查找的是不是：
- normal force diagram 法向力图表
- Normal force of the total weight of the payload and the carriage. 载荷与支架总重的法向力。
- The origin of the normal force is similar to the origin of tension in a string. 法向力的起源与绳子上的张力的起源相似。
- Three main problems caused by normal force when linear motor was used in machine tool were presented. 发现了法向吸力在直线电机的实际应用中导致的推力波动问题、装配问题和机床隔磁问题。
- Enhancement of the vortical effect can benefit both the side force and the normal force. 涡系诱导作用增强，对侧向力和法向力都有增值。
- We calculate their strength based on finding the critical section by drawing the shearing force diagram and bending moment diagram that is relatively complex and needs lots of work. 它们的强度计算必须以剪力图和弯矩图的绘制来找到危截面为前提,而这一绘制过程复杂,计算量大。
- When considering external asperity, friction coefficient decreases with increase of follow deformat and normal force. 考虑表面微凸时，摩擦系数随着变形量的增加，法向压力的增加，摩擦系数呈现下降的趋势；
- For sliding contact, the coefficient of kinetic friction Uk is defined as the ratio of the frictional force to the normal force. 滑动接触时，动摩擦系数Uk的定义是摩擦力与法向力的比率。
- The relationship between the contact normal force, area of tire footprint, and footprint of tire under different radius of drum was discussed. 分析了轮胎在不同转鼓半径下的接触法向力、接触面积和接触印痕之间的关系。
- Forced diagram true face going to deoxidation left wing film literature and left wing literature and art in macroscopic view. 力图在宏观上还原左翼电影文学以及左翼文艺的真实面貌。
- Simple Drawing Method of Internal Force Diagram 简易法作内力图
- Designing inner force diagram by law methods 运用规律法绘制内力图
- The relation between deformation of bar under normal force and node displacement is analyzed and applied to setting up compatibility equations of deformation for statically indeterminate problems. 摘要分析了轴向拉压杆件的变形与杆端结点位移之间的关系，并将其应用于拉压超静定问题变形协调方程的建立。
- Artful Methods of Drawing Internal Force Diagram 巧画内力图
- QUICK DRAWING OF INTERNAL FORCE DIAGRAM 内力图的快捷画法
- FORC diagrams can also be used in ferroelectric, thermal and elastic hysteresis systems. FORC图谱法也可应用到其它有滞后效应的领域如铁电滞后、热滞后、弹性滞后等。
- The authors recommend the selected values of the air drag coefficient of ships, in addition to the approximate formula for the longitudinal positions of the action point of the normal force. 文章对试验结果进行了初步的分析比较,提出了水面船舶空气迎面阻力系数的取值范围及法向力作用点前后位置的近似计算公式,供读者参考。
- Based on the Hertz Contact Theory which the cylinder was only acted by the normal force, the problem that the cylinder was contacted with the plane in the normal force and a little torque was studied. 在仅作用有法向载荷的赫兹接触理论的基础上，对同时作用法向载荷及小的转矩的圆柱与平面的接触问题进行了研究。
- Shear force diagrams are drawn in the manner indicated, with negative shears below the baseline. 剪力图按指明的方式来画，负剪力画在基线以下。
- The finite element method was used to model situations where an indenter applies normal forces to a coated or uncoated aluminum substrate. 应用有限元法对由压头向涂层或未涂层铝基体施加正压力的情况进行模拟。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
