您要查找的是不是：
- nonsteady deformation process 不稳定变形过程
- Natural clays have their structure which must be destroyed during the deformation process. 天然粘土一般都具有结构性，其变形过程必然伴随着结构的破坏。
- STUDY ON DEFORMATION PROCESS OF COLD TUBE ROLLINGWITH DOUBLE-SET THREE-ROLLER MILL? 双排多辊式钢管冷轧变形过程研究?
- There is no need for solid solution and overaging pretreatments in the superplastic deformation process. 可省去固溶与过时效预处理工序。
- A simulation and analysis has beencarried out by using DEFORM3D for hot deformation process of finish-form punch with different configuration. 利用DEFORM3D系统，模拟研究了不同终成形凸模结构对套管叉热成形影响的规律。
- In this paper, the deformation process and deformation mechanism of Qilianshan Structure Belt, since Cenozoic era, have been discussed. 论述了祁连山构造带新生代以来的变形过程及形成机制。
- Relationship and control of axis sealing and internal pressure directly affects deformation process in tube hydroforming. 圆管液压成形过程中的轴向密封力与内压力的关系及控制直接影响到圆管的成形状态。
- Abstract: Relationship and control of axis sealing and internal pressure directly affects deformation process in tube hydroforming. 摘 要: 圆管液压成形过程中的轴向密封力与内压力的关系及控制直接影响到圆管的成形状态。
- It showed the distribution of stress and strain at various stages and the deformation process of the samples intuitively. 结果直观地显示了各阶段应力应变分布及试样的变形过程，仿真屈服强度、最大抗拉强度等与试验实测值吻合较好。
- A void growth equation is derived for elastic-plastic deformation process by means of representative volume element (RVE). 摘要采用体胞模型的分析方法推导了材料在弹塑性变形阶段的孔洞增长方程。
- Under the strain-induced anisotropic effect due to the configurational structure changes, the rod gradually becomes transversely isotropic duringthe deformation process. 作为应用实例，这个方程被用来预测理想粘弹性固体棒的单轴蠕变行为。
- The results show that the finite deformation constitutive equations based on Eulerian configuration are suitable for the compressive finite deformation process of lead. 结果表明，欧拉描述有限变形本构方程适合于铅的有限变形压缩规律的描述。
- Under the strain-induced anisotropic effect due to the configurational structure changes, the rod gradually becomes transversely isotropic during the deformation process. 由于考虑应变引发的内部结构变化，开始时各向同性的金属棒在单轴蠕变过程中将逐渐变为面内同性。
- In the complete deformation process, the permeability coefficient of brown mudstone is influenced by porosity and small cracks, boty effects are not distinguishable. 褐红色泥岩的渗透系数在整个应变过程中同时受孔隙和微裂隙的影响，两者的作用没有明显差别。
- The results show that the high-rate deformation process of the electroformed shaped charge copper liner is a kind of dynamic recovery and recrystallization. 实验结果表明电铸铜药型罩的高速变形过程是一个动态回复和动态再结晶过程。
- In the deformation process,pearlite colony rotate and aligned to the drawing axis.Cementite plates is bend,cut and drawn,and the dissolution of cementite occ... 变形过程中珠光体团发生转动,取向与拉拔轴线趋于一致,渗碳体经历了弯曲、剪切、拉伸等变形,形变量较大时渗碳体大量溶解。
- A simulation analysis was made on the extrusion and deformation process of the double cup shell wih finite-element numerical simulation software-DEFORM. 利用DEFORM有限元数值模拟软件对双杯形件的挤压成形过程进行了模拟分析。
- Abstract: A simulation analysis was made on the extrusion and deformation process of the double cup shell wih finite-element numerical simulation software-DEFORM. 摘 要: 利用DEFORM有限元数值模拟软件对双杯形件的挤压成形过程进行了模拟分析。
- Based on the studying knee folds and analysis structural deformation process in the ore areas,forming mechanism and its application have been discussed,which will help for mining. 笔者通过对“膝折”规律的研究,分析矿区构造变形史,并探讨其形成机理,对采矿起到一定指导作用。
- The mold shape is one major factor which affects metal deformation rules,but metal plastic deformation process can be controlled through the change of the mold shape. 模具几何形状是影响金属塑性流动的主要因素之一,通过改变模具的几何形状可以改变金属的塑性流动。
