您要查找的是不是：
- Keywords spindle/toolholder interfaces;FEA （finite element analysis）;non uniform stress field;contact pressure;axial position; 主轴/刀柄联接;有限元分析;非均匀应力场;接触压力;轴向位置;
- uniform stress field 均匀应力场
- Thus,it is considered that crustal stress field in the area investigated are relatively stable and uniform since Neogene. 晚第三纪以来，该区构造应力场相对稳定和统一。
- An interpolation algorithm for Non Uniform Rational B-Spline (NURBS) curve to control redundancy error was proposed. 摘要提出了一种能有效控制冗余误差的非均匀有理B样条曲线插补算法。
- The elastic stress field caused by an ellipsoidal inclusion with uniform dilatational eigenstrains in one of the two perfectly bonded semi-infinite solids was investigated. 摘要探讨了在两理想结合半无限大体中－带均匀本征应变椭球形夹杂引起的弹性场。
- A method is proposed to approximate arbitrary curves by spline functions with parameter of non uniform path distance. 提出用非均匀自然路径距离参数的三次样条函数近似表示任意曲线。
- The mapping is the same in all the vases so that each vase model can go with 10 different textures and with different stretching (non uniform scale). 但是所有瓶子的制作过程是一样的，每个瓶子模型配合10种不同的纹理，然后进行不等比缩放。
- The plane stress field is obtained by complex stress func... 平面应力场借助保角映射的方法通过复变应力函数得到。
- The 3-D Stress Field Measurement with Phase-shift Isodyne[J]. 引用该论文 计宏伟;计欣华;秦玉文.
- Conclusion When M/F is about 8 and two equal forces are added on both buccal and palatal sides, there are the uniform stress in the molar and controlled translatory movement. 结论下颌第二恒磨牙近中移动时，颊舌侧同时加力并且施加适当的近远中向的力矩，有利于牙齿的整体平行移动。
- Using form-finding analysis on a relatively complex cable-membrane structure, we get the corresponding form-finding results and uniform stress nephogram. 通过对一相对复杂的索膜结构进行的找形分析，得到了相应的找形结果与分布比较均匀的应力云图。
- Analysis of Formation Elastic Characteristics and Stress Field with Log Data. 利用测井进行地层弹性特征及应力场分析。
- The cross correlation analysis techniques on time domain to analysis the stimulated light curves of uniform and non uniform corona model and compares the stimulated results with the temporal property of Cygnus X 1 are employed. 利用时间域上的交叉相关分析技术对模型的模拟光变曲线进行时间分析 ;并与 Cyg X-1的观测分析结果进行比较 .
- Analysis of structure stress field and its application in east area of Zhanhua. 沾化凹陷东部地区构造应力场分析及其应用
- In the algorithm,non uniform meshes and three kinds of ABCs are adopted to reduce the order of the final sparse matrix equation,and compressed storage and fast iterative solver are applied to solve the sparse matrix equation. 在结构离散化过程中采用了非均匀网格剖分并且在网格截断边界上联合采用了三种吸收边界条件 ;以最大限度地压缩形成的稀疏矩阵的阶数 .;对稀疏矩阵方程采用压缩存储技术和快速迭代解法;以有效地减少所需内存和计算时间
- Analyzes the therm-structure-coupled stress field on a mixer by means of FEA. 运用有限元技术对混铁炉进行了热与结构耦合应力场分析研究。
- The more sophisticated nonlinear model of flight dynamics,which include non uniform inflow model,nonlinear aerodynamics of fuselage,rotor flap motion and forces coupling with the motion of helicopter body,is considered in inverse simulation. 逆仿真中采用了较为复杂的非线性飞行动力学模型 ;包括非均匀入流、机身非线性气动力以及包含机身运动耦合的旋翼挥舞运动与作用力模型 .
- The modern tectonic stress field is in keeping with that since cenozoic era. 现代构造应力场与新生代以来应力场基本一致；
- The plastic process analyses on uniform and non uniform cylindrical upsetting were made in detail on the basis of the principle of generalized variational inequality with friction. 基于摩擦约束广义变分不等式原理,对圆柱体均匀镦粗和圆柱体非均匀镦粗等金属成形工艺问题进行详细的塑性加工工步分析。
- Results They brought the results of the uniform stresses in the molar and controlled the translatory movement. 在加力点处，牙体颈缘处及根分叉区应力比较集中。
