您要查找的是不是:
- The result indicates that proper blank holder force and liquid pressure will help to reduce the occurrence of drawing defects and the application of hydroforming can get more uniform wall thickness. 研究结果表明,合适的压边力和液体压力能控制盒形件拉深缺陷的发生,采用液压拉深盒形件可获得更好的壁厚分布。
- Range Min and Max.-OD with wall thickness. 范围分钟和最大Od以壁厚度。
- The unpredictability of gas behavior makes it very difficult to control wall thickness, while water makes wall thickness uniform and repeatable. 气体的这种不确定性使控制壁厚非常困难。而水使壁厚均匀并且可重复性强。
- An interpolation algorithm for Non Uniform Rational B-Spline (NURBS) curve to control redundancy error was proposed. 摘要提出了一种能有效控制冗余误差的非均匀有理B样条曲线插补算法。
- A method is proposed to approximate arbitrary curves by spline functions with parameter of non uniform path distance. 提出用非均匀自然路径距离参数的三次样条函数近似表示任意曲线。
- The mapping is the same in all the vases so that each vase model can go with 10 different textures and with different stretching (non uniform scale). 但是所有瓶子的制作过程是一样的,每个瓶子模型配合10种不同的纹理,然后进行不等比缩放。
- The backing of bearings with greater wall thickness is not copper-plated. 轴承壁较厚的轴承,其背衬不镀铜。
- APACO processes Hardboard, MDF or Chipboard up to a wall thickness of 18mm. 橱柜/壁柜/橱柜门板/人造石厨房台面加工制作.
- The forecasted wall thickness was conformed to the experimental result. 预测的壁厚和实验结果吻合得很好。
- The cross correlation analysis techniques on time domain to analysis the stimulated light curves of uniform and non uniform corona model and compares the stimulated results with the temporal property of Cygnus X 1 are employed. 利用时间域上的交叉相关分析技术对模型的模拟光变曲线进行时间分析 ;并与 Cyg X-1的观测分析结果进行比较 .
- In the algorithm,non uniform meshes and three kinds of ABCs are adopted to reduce the order of the final sparse matrix equation,and compressed storage and fast iterative solver are applied to solve the sparse matrix equation. 在结构离散化过程中采用了非均匀网格剖分并且在网格截断边界上联合采用了三种吸收边界条件 ;以最大限度地压缩形成的稀疏矩阵的阶数 .;对稀疏矩阵方程采用压缩存储技术和快速迭代解法;以有效地减少所需内存和计算时间
- The more sophisticated nonlinear model of flight dynamics,which include non uniform inflow model,nonlinear aerodynamics of fuselage,rotor flap motion and forces coupling with the motion of helicopter body,is considered in inverse simulation. 逆仿真中采用了较为复杂的非线性飞行动力学模型 ;包括非均匀入流、机身非线性气动力以及包含机身运动耦合的旋翼挥舞运动与作用力模型 .
- End connection including wall thickness of connecting pipe if weld end and any special flange facings or finishes. 连接方式,如果是焊接端口和任何法兰面或表面,则包括连接管道的壁厚。
- The plastic process analyses on uniform and non uniform cylindrical upsetting were made in detail on the basis of the principle of generalized variational inequality with friction. 基于摩擦约束广义变分不等式原理,对圆柱体均匀镦粗和圆柱体非均匀镦粗等金属成形工艺问题进行详细的塑性加工工步分析。
- What is the foundry's checking frequency for control of core shift and wall thickness? 工厂检验芯偏移以及壁厚的频率?
- The tube deformation characteristics on ASSEL mill are deformation concentrating at shoulder and wall thickness in rolling zone increasing. ASSEL轧管机具有台肩集中变形、碾轧段壁厚增厚等特点。
- The wall thickness of a 1-litre bottle preform is 3mm. The cooling time is 10.8s. 1公升的矿泉水瓶瓶坯壁厚3mm,冷却时间便占10.;8秒。
- The wall thickness of a 5-gallon bottle preform is 8mm. The cooling time is 76.8s. 5加仑瓶瓶坯壁厚8mm,冷却时间是76.;8秒。
- When chilled water is used to cool the mould, cycle time is related to wall thickness as follows. 在冰水冷却的条件下,冷却时间与壁厚有以下的关系。
- NURBS Non Uniform Relational B Splines 非统一相关B样条
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries