您要查找的是不是：
- It mainly produces all sort of exterior rotor flow fan, centrifugal fan, eddy fan, exterior rotor motor and all kinds of motor stator and rotor plate and Aluminum pressure cast parts. 公司主要生产各类外转子轴流风机、离心风机、涡流风机、外转子电机，以及各类电机定转子冲片、铝压铸件。
- Both stator and rotor are made of ferromagnetic materials. 定子和转子都是由铁磁材料制成。
- motor stator and rotor 电机定转子
- Therefore, the stator and rotor and the vent was spinor into two parts. 因此，定子的不退、排气口被转子和旋子隔成两个局部。
- Based on the contact pattern between the stator and rotor, USM is classified as contact type and non-contact type. 根据电机定子和转子间能量传递方式,超声波电机分为接触型和非接触型。
- And, the cooling flow rate of the clearance between stator and rotor as well as the hole of rotor flange was obtained. 获得了静盘与转盘间隙以及转盘外缘小孔的冷气流量。
- Stator and rotor adoptted heavy technic have higher insulation grade and can endure high temperature. 定子、转子采用重型技术,绝缘等级高,耐高温。
- A new type of disk piezoelectric micromotor was given,which is non-contact between the stator and rotor. 提出了一种新型圆盘压电微电机,定子与转子间是非接触型的。
- Adopt stator and rotor duel cooling way to control the temperature of high viscosity product and heat sensitive material to a very low degree. 采用定子、转子双冷却方式，对于高粘度产品及热敏感材料，温度可控制到极低。
- Mainly for Silicon steel as stamping of minisize electric engine stator and rotor, also for stamping of thin galvanized sheet. 主要用于硅钢片等微型电机定子、转子的冲裁,也可用于镀锌薄板的冲裁加工。
- Provision of generator Stator and Rotor quality witness reports and/or records to the customer's supervisor during manufacturing. 在制造过程期间，向顾客的监造人员提供发电机定子和转子质量见证报告和/或记录。
- PM-shield TFSRM has permanent magnet on the teeth of stator and rotor to shield from a leakage flux at airgap, so it can increase the torque output. 采用三维有限元分析方法对电机的磁场进行了分析，表明了永磁屏蔽的有效性。
- In this paper, the shape of stator and rotor cascades was improved and the aerodynamic performance before and after improving was analyzed. 本文对动静叶栅分别进行优化改型,并对改型前后叶栅的气动性能进行数值分析。
- On the basis of analyzing the interanl structure of motor stator and technique of winding of rule at present.Puts forward a new technique of coilling sychronzed with embedding of stator winding. 在分析了电机定子内腔构造及现行分两道工序嵌、绕线的基础上，提出了定子嵌、绕线同步进行的新工艺。
- The question of magnetic path is transformed into the form of circuit topology to derivate the equivalent circuit between stator and rotor. 为了便于分析，将磁路问题转换成电路拓扑的形式，推导出定转子之间的等效电路。
- All levitation forces of the running train were obtained according to the distributions of overall magnetic conductance function and current charge curve for stator and rotor. 通过研究列车所在位置处的定子与转子总的磁导率函数分布和励磁曲线分布，得出列车运行过程中所有悬浮力的大小。
- Furthermore, the same levitation of AMB system is realized in which a non magnetic-conducting layer of material is installed between the stator and rotor. 此外,当在传感器的转子与定子之间加入一层非导磁材料时,也能静态悬浮。
- A new technology and equipment of annealing and bluing for finished stator and rotor of uncoated cold-rolled electric steel lamination in bell-type hydrogen furnace was introduced. 介绍了无涂层电工钢冲片迭片成型后的电机定子和转子在罩式炉内进行退火和发蓝处理一次完成的新工艺及装置。
- The effects of stator and rotor eccentricity on the magnetic field distributions,cogging torque and unbalanced force were calculated in this paper by using finite element method(FEM). 采用有限元法计算分析了定子偏心与转子偏心对无刷直流电动机的气隙磁场、定位力矩及单向磁拉力的影响。
