您要查找的是不是:
- Modulus of elasticity for tension? 拉伸弹性模量?
- Modulus of elasticity of volume? 体积弹性模量?
- He was promoted from chef of ring to headwaiter. 他从包桌服务员晋升为服务员领班。
- This kind of ring is one of our best-selling items. 这种戒指是销售最好的商品之一。
- He was promoted from chef of ring to headwaiter . 他从包桌服务员晋升为服务员领班。
- The static elastic modulus of the alloy is lower than 30 GPa. 合金的静态弹性模量小于30GPa;
- Excessive sloughing off of ring bobbin. 细纱管脱圈太多。
- The effect of ring dyeing is shown in Figs 10 and 11. 环形染色的影响如图10和图11所示。
- Basic movements of ring gymnastics should include the triple leap. 圈操的基本动作要求必须包含三次跳跃。
- These two parameters are nowadays called the modulus of compressibility. 这两种参数现被称为压缩模量。
- Having or consisting of rings or ringlike segments. 环状的,由环构成的有环或环形部分的,由环或环形部分构成的
- Actually,I once though of ringing you,but I didn't. 其实,我曾想到过给你打电话,但没打。
- Results The intensity limit and modulus of elastic of ACL are more than... 结果前交叉韧带的拉伸强度极限最大应变弹性模量大于内侧副韧带。
- Ideal for the production of rings. 可生产完美的焊圈产品。
- Stress analysis under dynamic load showed that the equivalent stress in both the die attachment adhesive and the sealing ring adhesive between the chip and the silicon protective cap decreased with the increase in the elastic modulus of potting resin. 动态载荷下等效应力分析表明:芯片粘结胶、芯片及其硅盖板之间封接胶环的等效应力随着灌封胶弹性模量(E)的增加而减小;
- With the reign of Ring Solomon the brief glory of the Hebrews ends. 希伯来人短暂的荣华与所罗门王的统治同时结束。
- According to elastic modulus of bending strength, ratio of knot and diameter, grain slope, yearly ring width and the wood defects of crackle, rot, discor, determinating indexes of board grade of small diameter larch. 根据抗弯弹性模量、节径比、纹理斜度、年轮宽度和裂纹、腐朽、变色等木材缺陷,确定小径落叶松层板等级。
- Elastic moduli of SCC were compared with those of normal concrete. 研究中以不同含砂率之混凝土配比进行弹性模数试验,并与一般混凝土比较。
- Keywords: geometric nonlinearity, sag effect, equivalent modulus of elasticity, vehicle-bridge interaction. 关键词:几何非线性、中垂效应、等效弹性系数、车桥互制。
- The ratio of stress to strain, or the stress per unit strain, is called an elastic modulus of the material. 应力与应变之比,即每单位应变的应力,叫做该材料的弹性模量。