您要查找的是不是:
- An epoxy modified silicone resin,which had the features of epoxy and silicone resins,was prepared by the polymerization of epoxy resin with compatible and reactive silicone oligomer. 采用分子量适中的环氧树脂对反应性有机硅低聚物进行共聚改性,充分利用有机硅树脂的耐高温性和环氧树脂的防腐性及高附着力。
- A new type of modified epoxy resin was obtained by modifing bisphenol A epoxy resin using organic silicon. 用氨基硅油和双酚A型环氧树脂为原料合成一种新型的环氧树脂。
- This paper reviews research progress in method of epoxy resin modified by organic silicon, as well as curing mechanics, the properties of crosslinked resin. 摘要综述了有机矽改性环氧树脂的主要方法及改性物固化机理、固化物性能研究进展。
- This paper reviews research progress in method of epoxy resin modified hy organic silicon,as well as curing mechanics,the properties of crosslinked resin. 综述了有机硅改性环氧树脂的主要方法及改性物固化机理、固化物性能研究进展。
- Novolac modified solid epoxy resin for rebar coatings. 改性的酚醛树脂,用于螺纹钢涂料。
- The effect of the irradiation time,laser intensity and spot diameter on the mass ablative rate of carbon fiber reinforced silicone modified epoxy resin composite was analyzed respectively. 分别分析了入射激光的辐照时间、强度和光斑直径对碳纤维增强有机硅改性环氧树脂复合材料质量烧蚀率的影响规律。
- EPOXY MODIFIED SILICONE RESIN FOR SPECIAL COATINGS 特种涂料用环氧改性有机硅树脂
- This article studied the properties of epoxy resin modified with oleic acid. 研究了油酸对环氧树脂酸酐固化物性能的影响。
- Mechanical properties of TDE-85/MeTHPA epoxy resin modified by polyurethane[J]. 引用该论文 李芝华;任冬燕;郑子樵;李波.
- Epoxy Resin Division of Baling Petrochem. 巴陵石油化工有限责任公司环氧树脂事业部。
- Standard general purpose Bis-F epoxy resin. 标准普通双酚F型环氧树脂。
- Polyester film,inductive, epoxy resin coating. 聚乙酯膜,有感结构,环氧树脂包封。
- Tough and chemical resistance of epoxy resin. 具有环氧树脂的坚硬性耐化学品性。
- These graphs show test results using acrylic silicone varnish and epoxy resin on the sensor plates. 以上图表显示,在测量有机硅丙烯酸清漆和环氧树脂的粘度数据。
- Modified silicone helpful in preventing pinholes, craters and mud cracking. 改性有机硅有助于阻止针孔;弧坑和龟裂.
- E: Max voltage applied when the resistor is used in silicon oil or sealed with epoxy resin. 最高工作电压是指电阻器封装于环氧树脂或浸没在硅油中可持续加载的电压。
- Hydroxyl silicon was used to modify epoxy resin.The molecule structure, molecule weight and reaction of modified epoxy resin was determined through IR, GPC and DSC respectively. 摘要采用羟基矽油对环氧树脂进行改性,对所制备的环氧树脂采用红外光谱分析了官能团结构,通过GPC法测试分子质量,采用差热扫描研究了其反应性。
- Water-borne acrylic resin was modified by grafted copolymerization of acrylic monomer and epoxy resin. 通过丙烯酸酯类单体与环氧树脂接枝共聚反应,对水性丙烯酸树脂进行改性。
- The GPC measuring found that the molecular weight of WPU modified by epoxy resin ishigher than that of WPU. 凝胶渗透色谱分析表明环氧树脂改性水性聚氨酯提高了聚氨酯的分子量。
- Objective To study the biocompatibility of the surface modified silicone intraocular lens (IOLs) in vitro. 目的观察表面修饰硅凝胶人工晶状体体外生物相容性的问题。