您要查找的是不是:
- Then,this paper uses rate distortion theory to model the lossy compression channel,and obtains the method that can get the minimum bit error rate under lossy compression. 在此基础上;应用率失真理论采用高斯信道来模拟有损压缩信道;得到了在有损压缩下使得误码率最低时;选择补偿因子的方法.
- Minimum bit error rate criterion 最低误码率准则
- The Minimum Bit Error Rate Optimal Power Allocation for Multiple-Input and Multiple-Output Eigenmode Transmit 多输入多输出系统特征模发射最小化误码率优化功率分配
- minimum bit error rate 最小误比特率
- minimum bit error rate (MBER) 最小误比特率
- At ISR = 10dB and BER (Bit Error Rate) = 10? 当干信比为10dB、误码率为10?
- When the optimization parameter of PDR is used, the power of system transmission is the minimum but the same bit error rate (BER) is obtained. 当采用最优的比值时,为达到相同的误比特率,所需的发射总功率最低。
- We then simulate the BER(bit error rate) performance of WLAN by baseband model. 在蓝牙干扰存在的情况下,用物理层基带模型对WLAN的误码率性能进行了仿真;
- The moving average length of channel estimator and the pilot to data channel power ratio are optimized analytically under the criterion of minimum bit error probability (BEP) for given signal to noise ratio (SNR). 根据给定信噪比下误码概率最小的准则 ,本文得到了理论上信道估计器最佳的平均长度和导频信道相对数据信道最优的功率比
- Thirdly, as the main performance of transmitter, the maximum data rate and Bit Error Rate (BER) have been analyzed. 接下来是对于系统主要性能的评估,对于数据发送器最主要的性能是极限数据率与误码率,这两个性能主要是由片上信号带宽以及信号完整性决定的。
- Bit Error Rate (BER) performance is investigated over Nakagami(m) multi?path fading channel. 本文给出了IS-95前向信道的调制和解调过程的数学模型,分析了IS-95前向信道在Nakagami(m)衰落信道下的误码率。
- Simulation results show that the bit error rate with MRC is identical to that with BLLR-GSC of L/2 branches. 仿真结果表明采用L支路基于信噪比的MRC的误比特率和选择L/2支路的BLLR-GSC的误比特率相等。
- Without proper compensation for MAI and ISI, Bit Error Rate (BER) is generated highly. 如果不对多址干扰及码间干扰加以适当补偿的话,接收信号就会有很高的误码率。
- The union of the error correcting code and parameter-induced stochastic resonance (PSR) was proposed to reduce the bite error rate (BER) of the digital signal processing. 摘要为了有效地降低数字信号传输过程中的比特误码率,提出了纠错编码与参数调节随机共振技术的结合。
- First the average and worst Bit error rate(BER) expression of QS-CDMA system was deduced, when the synchronous error is uniformly distributed within the symmetrical area. 我们首先推导出了QS-CDMA系统同步误差在对称区间上均匀分布的平均情况和最坏情况下系统误码率(BER)的表达式。
- BERT, which is short for bit error rate tester, is an important apparatus for the performance test of digital communication system. 误码仪(biterrorratetester,BERT)是数字通信系统性能测试的重要仪器。
- When transmitting signal is below 500 Kbps, increasing the system power can reduce the bit error rate (BER) for the signal suffering only flat fading. 当码速率较低时(500Kbps以下),信号受到平坦衰落,增大系统功率可以降低系统误码率。
- Internet was developed for text-oriented network applications when line transmission rate was very low while Bit Error Rate (BER) was very high. Internet是在线路传输速率低、误码率高的通信条件下,以文本数据传输为主的应用背景下诞生的网络,历史证明它所提供的“尽力而为”服务完全能够满足文本数据传输服务质量的需要。
- The measurement results show that 10 -11 of bit error rate can be achieved and the power penalty is only 1.4dB when BER is 10 -9 . 测量结果表明误码率可达到10- 11, 误码率为10- 9时的功率代价仅为1?4dB。
- Compared with initial Degree Distribution Based HARQ (DDB-HARQ) scheme, this scheme improves system performance such as bit error rate and throughput. 与原始的基于度分布的HARQ方案相比,该方案使系统的误比特率和吞吐量指标得到了明显改善。