您要查找的是不是:
- metallic glass ribbon 金属玻璃带
- Automatic tracking the cutting speed: do not need to change the cutting angle if the glass ribbon speed changed. 切割速度自动跟踪:玻璃带速度发生变化,不需要改变切割角度。
- Automatic tracking the wander of glass ribbon: it can track manually or electrically. 玻璃带跑偏跟踪:当玻璃带跑偏超量时,能手动调节跟踪(或电动跟踪)。
- The effects of addition of La55Al25Ni20 bulk metallic glass into ZA27 alloy are investigated. 将La55Al25Ni20大块非晶合金加入到ZA27合金中,研究了非晶合金对ZA27凝固组织的影响。
- Introduction Lift-out roll contacts with the glass ribbon immediately after being taken out from the tin bath to support and transfer the glass ribbon to the annealing lehr. 在浮法玻璃生产线上的提升辊、输送辊与通过锡浴的玻璃板接触,其辊面附着熔融锡。
- Current progress in the investigation into welding of hulk metallic glass is reviewed. 摘要综述了大块金属玻璃焊接领域的最新进展;
- In superplastic forming, bulk metallic glass has larger surface friction resistance than ordinary metal alloys. 大块非晶合金在超塑性成形时呈现出比一般金属材料更大的摩擦阻力。
- Effective magnetic permeability of Fe-based metal glass Fe_(36)Co_(36)B_(20)Si_4Nb_4 as mutual iron core was measured using mutual induction method. 磁导率与输入频率之间的关系,并采用互感方法测量了铁基金属玻璃Fe36Co36B20Si4Nb4作为互感器铁芯的有效磁导率。
- Using Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass rods of 5 mm diameter, fine spur gear with boss (pitch diameter 6 mm, number of gear teeth 24, modulus 0.25 mm) is fabricated with super-plastic die-forging method under vacuum condition. 以直径为5 mm的zr41.;25Ti13
- Temperature dependence of specific heat for the bulk metallic glass Zr48Nb8Cu12Fe8Be24 and annealed samples were investigated. Specific heat for both amorphous sample and annealed samples may be explained by Debye model. 对块体金属玻璃Zr48Nb8Cu12Fe8Be24及退火样品进行了低温比热测量,发现非晶态和退火样品低温比热在T<20 K范围内均可用德拜模型解释。
- In this paper, using Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass rods of 5 mm diameter, fine spur gear with boss (pitch diameter 6 mm, number of gear teeth 24, modulus 0.25 mm) is fabricated with super-plastic die-forging method. 本文以直径为5 mm的Zr41.;25
- The glass forming ability, the behavior of crystallization and mechanical properties of the Cu-Zr-based bulk metallic glasses have been investigated. 本论文以铜锆基大块非晶合金为研究对象,研究了其非晶形成能力、晶化行为和力学性能。
- We choose the multi-component bulk metallic glasses to study the structure transmissibility of metastable phase under high pressure. 选择多组元大块非晶合金,研究高压条件下亚稳相的结构遗传性。
- Crystallization kinetics of mischmetal-based bulk metallic glasses MM_ 55 Al_ 25 Cu_ 10 Ni_5Co_5 has been analyzed by differential scanning calorimetry (DSC). 通过示差扫描量热法(DSC)研究了混合稀土基MM55Al25Cu10Ni5Co5大块非晶合金的晶化动力学。
- Magnetic levitation melting and copper mold blow-casting of bulk metallic glasses were realized with ordinary high-frequency induction heating equipment. 摘要采用普通高频感应加热装置实现了大块非晶合金的磁悬浮熔炼和铜模吹铸法制备。
- This is the sense of touch, in the city you walk, you know, you crash people, and people knock you, in LA nobody touches you, we always behind this metal glass, we regress the touch so much, we crash each other just we can feel something. 这就是接触的感觉,在任何城市里,你和身边的人们互相碰撞,在洛杉矶,没有人能碰着你,我们躲在这些金属玻璃后面,我们深切地怀念那种感觉:冲撞在一起然后体会那种感觉。
- The emery is a hard metallic substance. 金刚砂是非常坚硬的金属物质。
- Causes and adjustment of float glass ribbon slanting on main conveyance rollers 浮法玻璃在主线输送时跑偏原因及调整方法
- The Calculating Formula for Shrinkage Allowanceof Glass Ribbon Width in Tinbath 锡槽中玻璃带收放量的计算
- Working characteristic of Fe-based metal glass Fe_(36)Co_(36)B_(20)Si_4Nb_4 core,the relationship of frequency,field current and induced voltage,the relationship of magnetic permeability and input frequency were studied. 研究了Fe36Co36B20Si4Nb4铁基环状金属玻璃作为互感器铁芯材料的工作特性,即频率、励磁电流与感应电压之间的关系;