您要查找的是不是：
- The realization of metal transfer controlling in MIG/MGA welding relies on the acquiring of high quality droplet signal with excellent adaptivity to transfer mode. 熔滴过渡控制的实现，取决于获得宽工艺适应性的熔滴过渡传感信号。
- Using high speed photography and ANALYSATOR HANNOVER, metal transfer modes of flux-cored wire were observed and analyzed.The reseach results are confirmed. 采用焊接过程的高速摄影技术和汉诺威焊接质量分析系统对药芯焊丝的熔滴过渡形态进行观察分析。
- Evaluation of typical metal transfer modes for covered electrode 焊条典型熔滴过渡形态的判读
- Mode of Metal Transfer for GMAW (Spray arc, short circuiting arc, etc. 金属过渡方式(射流或短路等)
- metal transfer mode 熔滴过渡形态
- Netscape is unable to set the FTP transfer mode with this server. Netscape无法对此服务器设置 ftp 传送方式。
- There are two different transfer mode in FTP, ASCII and binary mode. 在FTP中有两种不同的传输模式;ASCII模式和二进制模式.
- A shielding gas is employed and the transfer mode is not "short-arc". 采用保护性气体和非短弧的过渡方式。
- Asynchronous Transfer Mode is defined as transfer mode for B-ISDN by ITU-T. 异步转移模式（ATM）已被国际电联于1992年6月定义为未来宽带综合业务数字网（BISDN）的转移模式。
- Transfer mode and resume support status are no longer shown on progress window. 在进度窗口中不再显示传输模式和继续支持状态。
- Q235 low carbon steel was welded by plasma-MIG (metal inert gas) welding process and the influence of welding parameters on weld appearance and transfer mode of droplet were studied. 摘要对Q235低碳钢进行熔化极等离子弧焊接工艺试验，并研究其工艺参数对焊缝成形和熔滴过渡的影响。
- Arc blow, plasma streaming, and metal transfer are some of the welding arc characteristics strongly influenced by the presence of the magnetic fields. 磁场的存在对于电弧偏吹、等离子体流以及金属过渡等基本的电弧的性能产生强烈的影响。
- Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding. 短路过渡焊接时，熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
- Then there's a technology proposed by several Swedish companies,called Dynamic synchronous Transfer Mode(DTM). 其次，有一项几家瑞典公司提出的技术，叫动态同步传输模式（DTM）。
- The results show that the metal transfer forms of high cellulose electrode contain spray transfer, explosive transfer and short circuiting transfer. 结果表明，高纤维素型焊条立向下焊时表现为混合过渡形态．有细颗粒和大颗粒喷射过渡，爆炸过渡，短路过渡。
- SS7 is used in mobile,wireless networks and asynchronous transfer mode (ATM) networks. SS7 用于移动无线网络和异步传输模式 (ATM) 网络。
- The most often used switching technology for the broadband information highway is asynchronous transfer mode, or ATM switching. 宽带信息高速公路上最常用的交换技术是异步传输模式，即ATM交换。
- The technology of numerical simulation for metal transfer in GMAW is one of the front and research hotspot in the weld filed, which has achieved great progress in recent years. 摘要熔化极气体保护焊熔滴过渡数值模拟作为焊接学科的前沿领域和研究的热点之一，近年来已经取得了较大的进展。
- The asynchronous transfer mode (ATM) is the transfer mode recommended for the broad integrated service digital network (B-ISDN) by ITU-T. 异步传输模式ATM是国际电信联盟建议用于宽带综合业务数字网(B-ISDN)的传输模式。
- High current MAG welding is an effective method to improve productivity.High-speed vidicon is used to study the effect of arc shapes and metal transfer on weld profiles. 采用高速摄像法对大电流MAG焊的电弧形态、熔滴过渡形式对焊缝成形的影响进行了研究。
