您要查找的是不是:
- Generally, the double bottom and double hull of ships are two types of metal sandwich structures. 在巨观的船舶结构模型中,双层底与双层壳结构,均属金属三明治结构。
- metal sandwich structure 金属填料夹层结构
- So sandwich structure had the same elasticity with cellular silicone elastomer. 由此可见,三明治式结构同样具有泡沫硅橡胶良好的弹性。
- Mege has own developed composite sandwich structure techonlogy system,and many patens in related area. 米格公司具有自行研发的独特的技术体系;并且申请了多项专利.
- In this paper,the dynamic analysis of the carbon fiber honeycomb sandwich structure was deeply investigated. 对碳纤维蜂窝夹层结构的动力学问题进行了深入分析。
- The main component of polyurethane foam and the technique were studied to develop a rigid polyurethane foam(PUF) which could be used in the sandwich structure. 针对夹层结构的特点,通过对聚氨酯泡沫的各主要组分及发泡工艺的研究,研制出了一种适用于夹层结构的硬质聚氨酯泡沫。
- Besides high specific strength and stiffness,GFRP sandwich structure panels with honeycomb core possess lower thermal conductivity and used as a heat insulation material. 玻璃钢蜂窝夹层结构板除高比强度、比刚度的优点外,还具有低热导率的特点,是一种隔热保温材料,在航天、航空、建筑方面得到广泛应用。
- The mechanical properties of a kind of honeycomb sandwich structure under effects of low temperature,particle radiation,ultraviolet ray and hot cold cycles etc. 以选定的一种蜂窝夹层结构为例,对其低温力学性能即拉伸、压缩、剪切等进行了各种外界环境包括温度、粒子辐照、紫外辐照、冷热循环等影响前后的性能测试和研究。
- If the electric conductivity of the inner layer was very small (such as metal Ti), as though it was a sandwich structured film, its GMI effect was weak, the result was in agreement with experimental results. 如果两层磁性材料中间夹导电性能很弱的金属材料(比如Ti),即使是三明治结构薄膜,其巨磁阻抗效应也是很小的,与实验结果取得一致。
- The cab structure is composed of steel framwork and composite sandwich structures with foam cores. 在满足司机室对刚度和强度要求的前提下,提出了一种新型列车司机室结构形式-钢骨架复合材料司机室混杂结构。
- truss-cored metal sandwich plate 点阵多孔金属夹芯板
- The authors deduced the analytic formula for the calculation of the giant-magnetoresistance of multi-layer sandwich structure and spin-valve structure, and also discussed what the calculation results implied. 论文作者得出了多层膜三明治结构和自旋阀结构的巨磁电阻效应的解析公式,并分析了结果的意义。
- This article is concerned Reaction Injection Molding(RIM) on polyurethane sandwich structure in fiber reinforced plastic, and raw material, tools and processing are described detailed. 本文主要阐述了FRP夹层结构用聚氨酯泡沫塑料芯材的反应注射成型技术,并分别从原材料、模具和成型工艺三个部分进行了详细的描述。
- In 1998 Vedyayev and cooperators calculated giant-magnetoresistance of multi-layer sandwich structure and spin-valve structure by using the linear response Kubo formula and Green function technology. 1998年Vedyayev等人运用这个线性响应的Kubo公式和格林函数技术计算了多层膜三明治结构和自旋阀结构的巨磁电阻。
- As for the situation where dual-polarizations are needed, a sandwich structure with the rectangular lattice in the center and triangular lattice in the outer space is brought forward to reducing the confinement loss and also the differential loss. 在单模双偏振光子晶体光纤方面,提出一种三明治结构,其中心为矩形结构,两边为三角结构,这种结构可有效降低光纤的泄漏损耗和两偏振模的损耗比。
- This thesis reports an analytic study on the giant- magnetoresistance of multi-layer sandwich structure and spin-valve structure by using Green function quantum statistics approach and nonlinear Kubo formula that was derived by sub-dynamics theory. 本论文报导使用量子统计格林函数方法以及由子动力学理论推出的非线性响应理论对多层膜三明治结构和自旋阀结构的巨磁电阻效应的解析研究。
- Through applying a temperature gradient AT to the melt extru-date from the die and cool it quickly with sizing equipment, a sandwich structure of PE rich/PEO rich/ PE rich was generat... 并通过偏光显微镜和显微傅立叶变换红外光谱仪分析,明确了挤出成型过程中形成梯度结构的驱动力是由温度梯度引发的热扩散索雷特效应。
- Corrugated board is a kind of sandwich structural materials and it can be studied as an orthotropic sandwich plate. 摘要瓦楞纸板是夹层结构材料中的一种,可以将其作为正交各向异性的夹层板来进行研究。
- Under HDT testing, when reaching it HDT temperature, the plating layer of part made by ABS, or 70%ABS /30%PC showed thermal expansion, whereas, the plating of sandwich structure showed no affect. 当电镀层受HDT破坏时,三明治结构试片电镀层没有产生膨胀变形的现象;纯ABS试片电镀层有产生热胀变形扭曲的现象;70%25ABS /30%25PC试片电镀层产生热胀变形的范围不大。
- To solve this problem, the author proposes the modal strain energy iteration method, and using ANSYS to calculate the resonance frequencies and loss factors of the damped sandwich structure. 论文针对粘弹性材料的这一特性,应用模态应变能迭代法来解决这一问题,并运用大型通用有限元程序ANSYS来求解复合夹层结构的各阶固有频率及损耗因子。