您要查找的是不是：
- membrane surface resistance 膜面电阻
- Many plastics have high surface resistance and low electrical conductivity. 很多塑料具有高的表面电阻和低的导电性能。
- The ionized form cannot penetrate the cell membrane easily because of its low lipid solubility and high electrical resistance, resulting from its charge and the charged groups on the cell membrane surface. 解离型则由于其脂溶性低，及其电荷和细胞膜表面带电荷基团所产生的高电阻，而不易透过细胞膜。
- Temperature and relative humidity can also affect the surface resistance. 温度和相对湿度也会影响表面电阻。
- The immobilization of PEG on membrane surface is a potent technique to improve the hydrophilicity and anti-fouling ability of the membrane. 在膜材料表面接枝聚乙二醇，可以有效改善膜的亲水性，提高膜的耐污染性。
- Crosslinking reagents such as glutaraldehyde (26, 27), the simplest form, may offer stable coupling of the immunoreactant to the membrane surface. 交联试剂如戊二醛，最简单的结构，可使免疫反应物在膜表面稳定联结。
- It can increase the cross-flow velocity along membrane surface,and make the distribution of velocity more sym... 出水水头、污泥浓度、膜通量、混合液粘度、膜面错流流速等对膜阻力有影响。
- Generally speaking, the fimbriae are necessary for bacteria to colonize on the mucous membrane surface of the host. 一般来说，细菌在感染时需要靠著纤毛吸附于宿主黏膜表面来达到附著的目的。
- The membrane surface was damaged.CONCLUSION: Ethionine and tetracycline can lead to the hepat... 结论:乙硫氨酸和四环素均可不同程度地导致肝细胞的脂肪变性。
- Reduce surface resistance and dissipate static electricity effectively, Non-flammable and easy to use. 可减少薄膜及塑料产品表面静电产生及有效排放静电，非燃性、使用方便。
- Note that the velocity not too quickly in order to avoid photoptic liquid bubble pinholes membrane surface. 夺纲速率必给功迟，以免感平液起泡、膜背表现针孔。
- Figure 4-23 is a configuration for measuring surface resistivity. 图4-23是测量表面电阻率的配置情况。
- Clean-in-place systems can be used to clean membrane modules, with the most rapid flow rate possible to induce turbulence at the membrane surface. 平面清理系统可用于膜组件的清理。
- Superconductivity - Part 7: electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies. 超导性。第7部分:电子学特性的测量。
- The results of polysaccharide test show that contents of polysaccharide on membrane surface and its pores of AMBR are more than that of MSBR. 通过测定膜丝上多糖的含量分析了两者在膜污染速率上存在差异的原因,发现序批式膜生物反应器膜丝上的多糖含量要少于好氧式膜生物反应器。
- In glow discharge,Polycarbonate (PC) membrane is modified bydepositing plasma polymer of C_2H_2/CO_2/H_2 onto PC membrane surface. 利用辉光放电技术,将C_2H_2/CO_2/H_2的等离子体聚合物沉积处理聚碳酸酯膜表面进行改性。
- GAC was added into MBR to interfere the formation of cake layer on membrane surface,and to lighten membrane fouling and clogging. 向膜生物反应器(MBR)中投加颗粒活性炭(GAC)以干扰膜面滤饼层的形成,减轻膜污染与膜堵塞。
- The surface resistance of HDPE blended with solid and liquid antistatic agents and that of HDPE blended with only solid or liquid antistatic agent were analysed. 摘要分析了固态和液态抗静电剂在HDPE中混合使用与单组分抗静电剂在HDPE中使用的表面电阻率变化情况；
- Low microwave surface resistance and excellent laser response characteristics of HTS film are contributed to the favorable properties of this attenuator. 该衰减器的实质是利用液氮温区高温超导薄膜极低的微波表面电阻和卓越的激光响应特性，实现优良的衰减功能。
- Electricity for powering a fuel-cell car is produced when electrons are stripped from hydrogen atoms at catalysis sites on the membrane surface. 当隔膜表面的触媒使氢原子上的电子游离时，即产生电力，供应燃料电池汽车动力。
