您要查找的是不是：
- Study on the Polymer Melt Flow Field under Vibration Force Field 振动力场作用下聚合物熔体流场的理论研究
- melt flow field 熔体流动场
- Affect the melt flow rate and the cooling speed. 会影响熔体的流动性和冷却速度。
- The teeming time and height affect flow field too. 并分析了流体注入时间、注入高度对流场的影响。
- Error: gui-monitor-residuals: Uninitialized flow field. 直译就是流场没有初始化！！！！重新初始化。
- Fluid pressure signal validates result of flow field computation. 液体压力信号验证流场建模与计算的结果。
- The developing process of CRM of polypropylene melt flow rate has been introduced. 介绍聚丙烯熔体流动速率标准物质的研制过程。
- The crystallinity of polypropylene with different melt flow rate (MFR) are measured by X-ray method. 用X射线法测定了不同熔体流动速率下聚丙烯材料的结晶度。
- The melt flow rate (MFR) impacting to crystallinity and properties of polypropylene (PP) was studied. 研究了聚丙烯(PP)熔体流动速率(MFR)对结晶度及性能影响。
- The research was made on the afterbody flow field of civil aircraft. 本文运用计算与实验相结合的研究方法对民机机身后体流场进行了研究。
- The position of the bottom blown nozzles will influence the flow field d... 在吹气量一定的情况下,底吹喷嘴位置对流场有较大影响。
- Melt flow through glass fiber mat during GMT melt impregnation [J].Acta Materiae Compositae Sinica, 2000, 17(3): 28-32. GMT熔融浸渍中熔体在玻纤毡中的流动[J].;复合材料学报;2000;17(3):28-32
- The typical seepage flow field of the bottom for the spillway dam is obtai... 最后计算了典型的坝基渗流流场,计算结果与实验结果吻合较好。
- Experimental Study on Image Preprocessing of Thermal Flow Field Tomogram[J]. 引用该论文 姚卫;闫大鹏;王振东;尤海航;贺安之.
- Besides,60/40/2/3 HIPS/lPC/PMPI/BCP showed similar melt flow rate and mechanical properties with those of 60/40/3 HIPS/hPC/BCP. 此外 ,共混物 60 /4 0 /2 /3HIPS/lPC/PMPI/BCP与 60 /4 0 /3HIPS/hPC/BCP的流动性以及力学性能也非常接近。
- The influences of die radius, load and temperature on the flow properties of FEP melt were investigated by using a melt flow indexer. 应用熔体流动速率仪考察了口模半径、载荷及温度对聚全氟乙丙烯(FEP)流动性能的影响。
- The melt flow index of the blends was increased when the content of PEEK was decreased and melt temperature was increased. 结果表明：共混物的熔体流动指数随PEEK含量的降低和熔体温度的升高而增加；
- Factors influencing the graft ratio and melt flow rate of LDPE were studied based on the melt extrusion of methyl acrylic acid (MAA)grated onto LDPE. 通过聚乙烯熔融挤出接枝甲基丙烯酸(MAA),研究了各种因素对LDPE接枝率及熔体流动速率的影响。
- The effect of screw rotation speed on the grafting level and melt flow index of the grafted product(POE-g-GMA) is investigated. 采用在熔融挤出过程中提高双螺杆挤出机螺杆转速的方法,研究了机械力引发甲基丙烯酸缩水甘油酯(GMA)熔融接枝弹性体POE的接枝反应。
- Finally, experiments are performed to testify the flow field simulation results of FTX polygon. 最后本文对六棱柱元件的流场模拟计算结果进行了实验验证。
