您要查找的是不是:
- It prepared LDPE/nano-CaCO 3 film by means of melt blending method,and studied the mechanical proper-ties of modified film. 采用熔融共混的方法制备了低密度聚乙烯(LDPE)/纳米CaCO3薄膜,并着重对改性膜的力学性能进行了研究。
- The polyhedral oligomeric silsesquioxane/silicone rubber composite was prepared by melt blending method through Haake inner mixer. 采用熔体共混法制备了笼型硅氧烷齐聚物(POSS)/硅橡胶复合材料。
- In this paper, (PPC)/organoPHilic montmorillonite (OMMT) and (PPC)/organoPHilic rectorite (OREC) nanocomposites were prepared by a melt blending method . 关于PPC/层状硅酸盐纳米复合材料的老化和降解的研究尚未见报道。
- The SBR/kaolin nanocomposites prepared with melt blending method had the similar mechanical properties and better thermostability compared with the rubber reinforced by silica white. 熔融共混法制备的复合材料的力学性能基本接近白炭黑填充橡胶,其热稳定性能明显优于白炭黑填充橡胶。
- melt blend method 熔融共混
- ABS is a stock capital blend method backed by the asset of the project. abs是以项目所属的资产为支撑的证券化融资方式。
- PPS/PEEK melt blend prepared by melt-blending is introduced,and the influence of a dif- ferent content of PEEK and a different size of PEEK particales on the crystallization behavior of PPS in the PPS/PEEK blend is investigated by DSC. 采用熔融共混法制备结晶/结晶共混体系PPS/PEEK,并用差示扫描量热法研究了不同PEEK含量和不同PEEK粒径对PPS/PEEK共混物中PPS组分结晶行为的影响。
- The multiwalled carbon nanotubes(MWNT) were introduced into the polymerization of amino-capped PA6 after oxidization and chloroformylation to produce PA6/MWNT masterbatch which was mixed with PA6 chip and spun into PA6/MWNT fiber via melt blend spinning. 将多壁碳纳米管(MWNT)氧化后,酰氯化处理,在氨基封端的PA6聚合时加入,制备PA6/MWNT母粒,将母粒同PA6切片熔融共混纺丝,制备PA6/MWNT纤维。
- SPES/PSF ultrafiltration membrane was successfully prepared by the blend method, with sulfonated polyethersulfone (SPES) and polysulfone (PSF) as membrane material. 摘要 以磺化聚醚砜(SPES)和聚砜(PSF)为膜材料,用共混法制备了SPES/PSF超滤膜。
- The method to generate compatibilizers“insitu”during melt blending in extruder using reactive polymers or functionalized polymers are described. 阐述了利用挤出机通过各种反应性聚合物或官能化聚合物在熔融共混过程中就地形成共聚物增容剂的方法。
- The immiscible poly(ethylene terephthalate)/polypropylene blend (PET/PP) was prepared via melt blending. 用熔融共混法制备了聚对苯二甲酸乙二醇酯(PET)/聚丙烯(PP)复合材料。
- High impact and low wear Polyoxymethylene(POM) blend was prepared by melt blending of POM with copolyamide (COPA),silicone grease,oil carrier and surfactant. 将聚甲醛(POM)与适量的三元共聚尼龙(COPA)、硅油、载油体及表面活性剂熔融混合,制备出了性能优良的高抗冲、低磨耗POM共混物。
- Melt the butter and then blend in the flour. 先把黄油融化,然後加入面粉。
- The effects of blending method on the morphology and properties of HDPE/PC blend were studied. 研究了不同共混方式对高密度聚乙烯(HDPE)/聚碳酸酯(PC)共混体系形态与性能的影响。
- High impact and low wear Polyoxymethylene (POM) blend was prepared by melt blending of POM with copolyamide (COPA), silicone grease, oil carrier and surfactant. 摘要将聚甲醛(POM)与适量的三元共聚尼龙(COPA)、矽油、载油体及表面活性剂熔融混合,制备出了性能优良的高抗冲、低磨耗POM共混物。
- The chlorosulfonated polyethylene(CSM)/SBR blend with interpenetrating network(IPN) was prepared with the mechanical blending method. 用机械共混法制备了具有互穿聚合物网络(IPN)结构的氯磺化聚乙烯(CSM)/SBR共混物。
- Poly(butylene terephthalate)(PBT)/nanoSiO2 composites were prepared by melt blending and investigated. 采用熔融共混的方法,将纳米SiO2添加到聚对苯二甲酸丁二醇酯(PBT)中,制备出PBT/纳米SiO2复合材料,对其力学和结晶性能进行分析研究。
- The reaction mechanism of PBT and SBS g GMA during melt blending was investigated. 用FTIR、WAXD、DSC、MI等方法对共混物进行了表征。
- The method seems good but it needs to be tried out. 这个方法似乎不错,但需要试验一下。
- Nano-meter BaSO4 reinforced PET composite was prepared by means of melt blending. 通过熔融共混法制备了纳米硫酸钡增强PET复合材料。