您要查找的是不是：
- CFR uses low carbon, medium alloy steel as the matrix. CFR合金采用低碳、中合金钢成分为基体。
- medium alloy steel 中合金钢
- The supply of alloy steel is very tight at present. 合金钢的供应目前很紧张。
- The connecting rod is made from forged alloy steel. 连杆由锻造的合金钢制成。
- Welding of importand low alloy steel structures. 用于焊接重要的低合金钢结构。
- A cast alloy steel 0Cr18Ni5Mo3 is designed. 设计了OCr18Ni5Mo3铸造合金钢。
- For medium or low speed roughing large chip sections for steel cast iron and alloy steel under unfavourable conditions. 适于钢、铸铁、合金钢不利条件下大切削断面的中、低速精加工。
- For semi-finishing medium chip sections or finishing small chips sections for steel, cast steel and alloy steel. 适于钢、铸铁、合金钢中切削面的半精加工或小切削面的精加工。
- The steel works is branching out into alloy steel and steel plates. 这家炼钢厂正在扩大生产范围，准备生产合金钢和钢板。
- I have an inquiry here for1000 ton of special alloy steel which I hope you can supply. 我这里有个询价，求购1000吨特殊合金钢，希望你方能供货。
- The intermedium temperature microstructure of medium carbon alloy steel is upper and lower bainite. 中碳合金钢的中温转变组织只有上、下贝氏体。
- Suitable for welding low carbon steel, low alloy steel structure. 适用于各种低碳钢、低合金钢构件的焊接。
- Our factory mainly produces carbon lamps and alloy steel. 本厂主要生产普碳钢和合金钢。
- A rapid and direct method for determination of chrome in medium/lower alloy steel by AAS in dilute nitric acid medium without separation was reported. 在稀硝酸介质中,不需分离其它干扰杂质,用原子吸收分光光度法直接测定中、低合金钢中的铬。
- Microstructure and microhardness of adiabatic shear band(ASB) and those near ASB in medium carbon Cr-Ni-Mo-V ultra-high strength low alloy steel plate have been investigated. 测量了中碳Cr-Ni-Mo-V系低合金超高强度钢中绝热剪切带(ASB)及其周围金属的显微硬度,观察了其微观组织。
- B is formulated by refined mineral oil and chloride, sulfide additives. It can be used in punching or medium drawing for cast steel, carbon steel and alloy steel. 冲压、拉伸油是由精制矿物油与含硫、氯添加剂调和而成，适用于铸铁、碳钢、合金钢等黑色金属的冲压及中度拉伸加工。
- Semifinishing Of ghe medium chip sections of steel,case steel and alloy steel or finshing of steel ,cast steel and alloy steel or finshing of their small chip sections. 适于钢、铸钢、合金钢中切屑断面的半精加工或小切屑断面的精加工。
- Design and trial production of alloy steel CCM in Nanchang Iron & Steel Co. 南昌钢铁公司合金钢连铸机的设计及试生产
- All bearings are rolling bearings and the shafts are made of alloy steel. 轴支承全部采用滚子轴承。轴材料均为合金钢。链条均为强制润滑。
- A. Surface of Stainless Steel and high alloy steels; Not painted. 不锈钢及高合金钢的表面不需刷漆。
