您要查找的是不是：
- A method for optimizing the main dimensions of a cam-oscillating follower mechanism in common follower motions is presented with the MATLAB,which maximizes the cam volume and maximum pressure angles. 以MATLAB为辅助工具,给出了摆动推杆盘形凸轮机构在基本推杆运动规律时的基本尺寸优化设计方法,使凸轮机构的体积和最大压力角达到最小。
- Evaluating Rapidly Maximum Pressure Angle Value of Offset Cam Mechanisms by Using Replacement of High Pair with Low Pair 用高副低代法快速求解偏心轮凸轮机构最大压力角
- maximum pressure angle 最大压力角
- The maximum pressure allowable for the bomb is 20MPa. 贮气最大气压20MPa。
- This paper deal with the equations about maximum pressure on closed-circuit guide track in machine tool. 摘要本文推导出了机床闭式导轨面上最大压强的计算公式，该公式适用于任何可能的压板间隙，具有通用性。
- Maximum pressure without flash generates optimum physical properties for your RTP Company material. 最大的压力而没有毛边会造成使用的RTP公司材料有最适当的物理特性。
- Generally, standard gear hobs are only used to machine gears with the same modul, pressure angle as hobs themselves. 在一般条件下，标准齿轮滚刀只能加工与其模数、压力角相同的同制齿轮。
- The maximum pressure the hoes should be subjected to during proof pressure or system testing. 在举证压力或系统测试中，锄头应受最高压力，。
- Vein side raises circular performance, ascites and splenomegaly can accompany door pulse maximum pressure and appear. 静脉侧支循环的表现，腹水及脾肿大可伴门脉高压而出现。
- Maximum pressure differential required for valves with lever actuators should not exceed the limits listed. 采用杠杆执行器要求阀门的最大压差不能超过下表所列的极限。
- Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built. 且建立该凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输入扭矩表示式。
- The maximum pressure of the machine is 100 tons. It can suppress all kinds of cement products within 400 mm of the length. 该机最大压力为100吨,可以压制边长小于400毫米的各种水泥压制品。
- This paper deals with measuring the diameter of addendum circle for a involute spur cylindrical gear and calculating and determining its mode number and pressure angle. 本文阐述了渐开线直齿圆柱齿轮齿顶圆直径的测量与齿轮模数、变位系数、压力角等参数的确定方法和步骤.
- The influence of the laser wavelength and pulse duration upon the maximum pressure and the pressure duration were discussed. 最后讨论了激光波长和脉冲宽度的变化对冲击波的峰值和持续时间的影响。
- It is confirmed that the sinusoidal gear can be easily undercut with a specific addendum height value decided only by the design pressure angle of the gear. 经讨论和仿真证实;正弦齿条所生成的齿轮在一个特定的齿顶高下最容易发生根切;该齿顶高数值只取决于正弦齿轮的设计压力角.
- The maximum pressure distortion in the inlet surface increases with the stator moving to the right then has decreasing tendency. 随着静子叶片右移，在进口截面处最大压力畸变逐渐增大，之后呈下降趋势；
- With cylindrical coordination,this paper establishes the contour surface equations and pressure angle formula of the conical grooved cam with translating conical roller follower. 借助柱面坐标,建立了圆锥滚子直动从动件圆锥槽凸轮的廓面方程和压力角公式。
- That results in a maximum pressure of 0.6 to 0.9 MPas at least below 1.0 MPas for vessels operated at atmospheric pressure. 如果压力放散系统的压力进入到爆破片中，对爆破片不会产生影响。
- In accordance with the characters of end section involute of helicoids,it is analyzed of change of the base circle affecting the pressure angle of involute profile. 依据渐开螺旋面端面渐开线的性质，分析了渐开线基圆变化对渐开线齿形压力角影响。
- The spark is therefore timed to occur before the piston reaches top dead center, otherwise maximum pressure would not be reached in time. 因而，在活塞到达上死点前，火花便会发生，否则就不可能适时达到最高的压力。
