您要查找的是不是:
- maximum applied load 极限荷载
- Secondly it is necessary to define the applied load. 其次,需要确定所作用的载荷。
- When measuring the leakage resistance with a DMM, the maximum applied voltage is usually less than 15V. 当利用DMM测量漏阻时,施加的最大电压通常小于15V。
- From select menu apply load selection. 点击选择-载入选区。
- At zero applied load, the crack is closed along the perimeter of the specimen but open in the center. 在施加零载荷处,试样周边的裂纹是闭合的,而中心则是张开的。
- Elastic recovery means that when the applied load is released, the piece returns to its original shape. 弹性回复是指当样品所受应力撤销后,其完全回复到初始形状的现象。
- When the applied load is increased, the curve of COF is steady, and the value of COF is steady and less trending. 施加负荷渐渐增加后,平均摩擦系数值会趋近稳定,其曲线平稳且其值较小;
- When the applied load is increased continuing, the curve of COF is liner, and the value of COF is less trending. 而当施加负荷在持续增加,平均摩擦系数则会开始渐渐变大,其曲线呈线性。
- The indenter, which has a finite elastic modulus, also undergoes elastic deformation under the applied load . 压头也具有一定的弹性模数,所以在加载的时候它自身也要承受弹性变形。
- This maximum applies to an entire qualification string if the element name is qualified. 如果元素名称受到限定,则此最大值适用于整个限定字符串。
- Analyses of dynamic crack propagation and crack arrest for a specified initial flaw size, external geometry, and applied load can be conducted in either of two different ways. 为特定的初始裂纹尺寸、外部几何形状和应用载荷对动态裂纹扩展和裂停止进行分析,可以用两种不同方法中的任何一种来进行。
- Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding. 塑性变形首先发现在裂纹顶端,当工作载荷超过了普通屈服时,则传播到物体中。
- The maximum load for this lorry is one ton. 这辆卡车最大载重量是一吨。
- The external forces include reactions (R)as well as applied loads(P). 外力包括反力R和施加力荷载P。
- To simulate the vulnerable working conditions of APG under the applied load,place the substituted load equal to the wind load and the crowd extrusion load on the prototype of APG. 通过对屏蔽门样机施加等效风压荷载和人群挤压荷载,模拟屏蔽门受荷载作用下的不利工况。
- At the beginning, tests are made on mechanical properties of the plastic material for making the model, the magnitude of applied load sustained and the durability measurement on the material. 开始时,对模型用的塑性材料的机械性能,试验中采用加荷的大小值,以及材料的持久性的测量作了一些试验。
- Nor does it present load to the engine. It does apply load to the generator and limits the capacity of the generator. 无功功率无功功率是指电流在发电机、电动机、变压器等的感应线圈之间往复流动,这也构成了电力负载的一部分。它并没做有用功,而且也不是发动。
- Load-Wear Index An index of the ability of a lubricant to prevent wear under applied loads as determined in the Four-Ball EP Tester. 负荷-磨损指数是衡量润滑油在四球极压试验中所施加的负荷下所表现出的抗磨能力的一项指数。
- Working with engineers, develops and optimizes part shapes and sections to withstand applied loadings. 和工程师一起工作,发展和优化零件的形状和截面使其能够承受应用负荷。
- Our goal is to achieve the maximum of efficiency. 我们的目标是取得最高的效率。