您要查找的是不是:
- maximum principal shear strain 最大主剪应变
- An equation for the calculation of true shear strain was derived from the integration of infinitesimal shear strain in plane shearing process with constant principal shear strain direction. 对切应变主轴不变的平面简单切变过程,通过无穷小应变的积分,导出了真实切应变计算公式。
- Moreover, high value region of maximum shear strain and superficial expansion in this area is in Tianjing, Beijing, Tangshan area. 区内最大剪应变、面膨胀的高值区在天津、北京、唐山一带。
- The shear strain can be determined in the following way. 用下列方法能够确定切应变。
- Shear strain in MBE grown CdTe films on Si(211) substrates[J]. 引用该论文 王元樟;陈路;巫艳;吴俊;于梅芳;方维政;何力.
- The transformation is due to the shear strain imposed on the specimen by ECAP. 该转变发生是由于ECAP过程中材料承受剪切应变,应变能累积诱发再结晶,从而形成等轴晶双相结构。
- The results show that the high value zone of the maximum principal stress in this period distributes the basinal margin with low interior stress. 模拟结果表明,该期构造应力场最大主应力的高值区主要分布在盆地周边,内部应力值低;由南向北,最大应力值有由大变小的趋势。
- Based on the actually measured nature stress data of Shenzhen, we find the value of maximum principal stress is small and direction of it is NW, vertical direction of fault. 根据地应力监测资料,最大主应力量值小且应力方向北西向,与断裂近乎垂直,不利于断裂活动。
- The graph of maximum principal stress vector indicates the modeling is appropriate, and the style of crazing progress shows a satisfied agreement with the experimental phenomena. 银纹化过程中的最大主应力矢量图说明计算模型以及计算方法是比较合理的。而且,本文所揭示出来的银纹化过程的规律与实验中观察到的现象是吻合的。
- The only strain is a shear strain and the dilatation is zero, these waves are called shear waves. 唯一的应变是剪应变而没有膨胀,这种波叫剪切波。
- Good bonds are always accompanied by surface extension, that is, plastic shear strain. 良好的键合总伴有表面延伸即塑性切向形变。
- the maximum shear strain orientation 最大剪应变方向
- Variation of Damping Properties Under Magnetic Field and Shear Strain Amplitude in Fe-Cr-Al Alloys. 高阻尼Fe-Cr-Al合金在磁场和应力场下的阻尼行为
- A combination of lateral bending plus flexion or lateral bending plus extension strongly increased the maximum shear strains. 合并有侧弯加屈曲或侧弯加伸展的运动很明显地增加了最大切应力。
- The elasticity of copolyester increases with the shear strain but decreases with the temperature. 弹性随切应力的增大而增大,随温度的升高而降低。
- A 5% Maximum Principal Strain Criterion to Prevent Gross Plastic Deformation 防止承压设备总体塑性变形的5%25最大主应变准则
- The residual strain is the additional shear strain created with the increase of pore pressure due to cyclic shear under initial shear stress. 残余应变是由于周期剪切引起孔隙压力增长;在初始剪力作用下产生的附加的剪应变.
- stress couples acting on the principal shear planes 主剪面应力对
- The results show that the data of shear strain 2 are reliable because the component 2 and 4 of shear strainmeter work normally. 通过对标定系数和滞后时间的分析认为:元件2、4工作状况比较稳定,观测值差应变2是比较可靠的;
- maximum principal compressive stress 最大主压应力方向