您要查找的是不是:
- Financial Sensitivity of the factory manufacture cost structure. 具备制造成本结构的财务概念。
- Great reduction in manufacturing cost. 生产成本大幅降低。
- Lopsided moment, in course of tower crane design, make inconvenient, and also increase the manufacture cost. 不平衡力矩的存在,给塔式起重机的设计带来不便,也增加了制造成本。
- The sale revenue cover the manufacturing cost but not the overhead. 销售收入与生产成本持平,但却不抵企业一般管理费。
- This method has following advantages: high converting rate, low soluble cadmium,good product quality,simple operation and cheap manufacture cost. 该法具有转化率高,可溶性镉低,产品质量好,工艺简单易操作,生产稳定且成本低等优点。
- Responsible for manpower, equipment and manufacturing cost budget. 负责人员设备以及制造成本预算。
- The hollow ball structure with divided segments made by punch press guarantees precision and quality,and(lowers) manufacture cost. 阀芯采用空心球体结构和分段冲压成形加工工艺,有效地保证了球体的加工精度和质量,降低了生产成本;
- The cost of ironstone accounts for 70 percent of the total cost of molten iron, the number is 40 when in the context of the whole manufacture cost. 铁矿石作为炼铁的主原料,占铁水成本的70%25,占整个产成品制造成本的40%25左右。
- Several traditional methods for the synthesis of 4-aminodi-phenylamine(RT Base) were reviewed in terms of synthetic conditions ,environmental influence,and manufacture cost . 综述了合成4氨基二苯胺(RT培司)的传统工艺方法,从合成条件、环保、生产成本这三方面对工艺进行了评价。
- Using an example,the dominancy of the present optimization method is testified in improving the efficiency of NC machining and cutting manufacture cost. 通过实例验证此优化方法在孔群加工中明显提高了数控加工的效率、降低了加工成本。
- Our manufacturing costs have gone up too much. 我们的制造成本增加太多了。
- Our manufacturing costs have gone up too much . 我们的制造成本增加太多了。
- Finally,with an example,it illustrated the dominancy of improving the efficiency of NC machining and cutting manufacture cost in multi-holes machining of the proposed methods. 最后通过实例验证此优化方法在孔群加工中明显提高了数控加工的效率、降低了加工成本。
- There are many problems on the preparation of micro-fluidic chip with the slide glass as substrate, such as the high manufacture cost and the long-producing cycle. 摘要以玻璃为基片的微流控芯片在制备方面存在制作成本偏高及加工周期较长等问题。
- Achieve the cost target, analyze and improve manufacturing cost in the section. 完成成本目标,分析和改善制造成本。
- The manufacturing cost decreases and the manufacturing yield increases. 降低了制造成本并提高了制造产量。
- Variable manufacturing costs would total $10 per relay. 每单位变动成本为10元。
- In advanced manufacture industry,the use of ceramic and metal joined complex as structure material can make the mutual compensation of ceramic/metal properties and decrease composite manufacture cost. 在先进的制造业中陶瓷-金属连接构成的复合件作为结构材料可以获得金属、陶瓷的性能互补,并降低复合材料制造成本。
- When CR being used for the material of cable sheath,blending a certain quantity CPE could develop the resistance to heat,modulus,tensile strength and tear strength,and the manufacture cost is reduced in a certain exrtent. 采用氯丁橡胶(CR)作电缆护套材料时,共混一定量的氯化聚乙烯(CPE)可明显改善其胶料耐热性,提高其定伸应力,拉伸强度及撕裂强度,且在一定程度上降低了生产成本。
- Abstract: Several traditional methods for the synthesis of 4-aminodi-phenylamine(RT Base) were reviewed in terms of synthetic conditions ,environmental influence,and manufacture cost . 摘 要: 综述了合成 4-氨基二苯胺 (RT培司 )的传统工艺方法 ,从合成条件、环保、生产成本这三方面对工艺进行了评价。