您要查找的是不是:
- Enter 0 for main pressure tolerance plus. 主压力正公差输入0。
- Activate the individual selection main pressure. 激活单个选择的主压力。
- Note the current main pressure actual value. 记录当前主压力的实际值。
- Enter 50% for main pressure tolerance plus and tolerance minus. 主压力正负公差输入为50%25
- Select "with filling" at the main pressure regulation. 选择“物料”调节主压力。
- Note the set value for compaction force main pressure. 记录主压力设定值。
- Thus it was demonstrated that the main pressure zone was little affected by the downstream flow condition. 由此可见,下游的流动情况对主要压力区几乎没有影响。
- Direct connection to mains pressure water supply is not permitted. 严禁直接连在有压力的供水装置上。
- The punch diagram displays that the increased compaction force main pressure will be regulated to the set value. 冲杆图表显示主压力增加校准设定值。
- Enter a value for main pressure set value that is approximately 10% higher than the displayed revolution average value. 输入一个主压力设定值,大约比旋转平均值高10%25。
- Enter a value for main pressure set value that is approximately 10% lower than the displayed revolution average value. 输入一个主压力设定值,大约比旋转平均值低10%25。
- The revolution average value displays that the compaction force main pressure exceeds the set value. 主压力旋转平均值超过设定值。
- Pay attention that the main pressure set value does not exceed the tolerance limit plus. 注意主压力设定值不能超过正公差。
- Pay attention that the main pressure set value does not fall below the tolerance limit plus. 注意主压力设定值不能低于正公差范围。
- Start the tablet press and keep it running until a new current revolution average value for main pressure is displayed. 启动压片机保持运行直到当前新的旋转主压力平均值被显示为止。
- A new value is entered at punch load that is below the value of compaction force main pressure. 在冲压加载主压力下输入一个新压力值。
- Adjust the tolerance limits of the main pressure in such a way that the pressure of the prepared punch lies within the tolerance limits. 调整主压力的允许范围,这时准备好的冲杆压力应在允许范围内。
- The main impediment to growth is a lack of capital. 影响发展的主要障碍是缺乏资本。
- Whether or not the reactor is installed with enclosure, the main pressure drop is focused in the fuel region.The pressure drop in the fuel region increases with the increase of the entry flowrate. 无论是否带有围桶,堆内压降均主要集中在堆芯燃料组件上,入口流量增大,堆芯燃料组件上的压降随之增加;
- The examples of main pressure reducing control and original temperature transfer control with adding depressant are proposed.The role of automation and control program in production management... 亦举出减压主控制和加降凝剂原温输送控制的实例,说明自动化在生产管理中的作用和控制程序该系统的减员增效成果。