您要查找的是不是:
- Enter 0 for main pressure tolerance plus. 主压力正公差输入0。
- Activate the individual selection main pressure. 激活单个选择的主压力。
- Note the current main pressure actual value. 记录当前主压力的实际值。
- Enter 50% for main pressure tolerance plus and tolerance minus. 主压力正负公差输入为50%25
- Select "with filling" at the main pressure regulation. 选择“物料”调节主压力。
- Note the set value for compaction force main pressure. 记录主压力设定值。
- The pressure pump was developed for a fast and simple pressure calibration. 压力泵是为快速简单的压力校准开发的。
- This can be found next to the water pressure pump ( see location diagram ) . 这可以在水压泵旁边看到(见位置示意图)。
- My main production companies operating joint spray, spray nozzle, high pressure pumps, piston pump, PVC hoses, nozzles and other farm and welcome new and old customers visit. 我公司主要生产经营喷雾接头、喷雾喷嘴、高压泵、柱塞泵、PVC胶管、农用喷管等,欢迎广大新老客户光临。
- Screw the FOX Racing Shox High Pressure Pump onto the air valve until the pump shows pressure on the gauge. Do not over-tighten. 把避震专用打气筒旋紧在气阀上直到避震气筒上的压力表有气压显示,不要过份旋紧。
- Direct connection to mains pressure water supply is not permitted. 严禁直接连在有压力的供水装置上。
- Thus it was demonstrated that the main pressure zone was little affected by the downstream flow condition. 由此可见,下游的流动情况对主要压力区几乎没有影响。
- Constant pressure pump is the most typic power component for hydraulic servo system.The pump's pressure characteristic affects quality of the control system directly. 恒压变量柱塞泵作为液压伺服系统的常用动力源,其压力输出特性直接影响着电液控制系统的品质。
- The punch diagram displays that the increased compaction force main pressure will be regulated to the set value. 冲杆图表显示主压力增加校准设定值。
- The stationarity of system could be improved if the system of hydraulic pressure pump station is the power source, and the system can realize the overload protection easily. 用液压泵站作为动力源可提高系统工作的平稳性,且容易实现过载保护;
- Enter a value for main pressure set value that is approximately 10% higher than the displayed revolution average value. 输入一个主压力设定值,大约比旋转平均值高10%25。
- Do not pressurize mattress with high pressure pumps. 不要用高压气泵给气垫加压。
- Enter a value for main pressure set value that is approximately 10% lower than the displayed revolution average value. 输入一个主压力设定值,大约比旋转平均值低10%25。
- The revolution average value displays that the compaction force main pressure exceeds the set value. 主压力旋转平均值超过设定值。
- Pay attention that the main pressure set value does not exceed the tolerance limit plus. 注意主压力设定值不能超过正公差。