您要查找的是不是:
- lumped element modeling 集总参数分析
- Its finite element model is established. 构造了其有限元模型。
- A static finite element model of an air spring was given. 摘要文中建立了空气弹簧的静态有限元模型。
- This paper described the non-linear motion equation of belt conveyor based on belt sag,with a lumped element model. It deduced the belt equivalent stiffness and studied its non-linear property. 用离散单元模型建立了基于胶带悬垂度的带式输送机非线性运动微分方程,推导了胶带等效刚度表达式,分析其非线性特性及对运动微分方程的影响。
- The finite element model of opening gap tantalum thin-walled tube is setup. 为了控制钽薄壁管焊接成形的质量,进行钽薄壁管开口间隙场计算模型的研究。
- Finite element modeling has become an important tool for predicting the membrane wrinkling at present. 有限元模拟已经成为目前薄膜褶皱预测的重要工具。
- The FDTD Analysis of the Nonlinear Lumped Element 非线性器件的时域有限差分法分析
- The way of building finite element modeling and the geometrical similarity of model are also discussed in the paper. 文中还讨论了有限元建模的方式与建模的几何相似性。
- Coupez T.3-D Finite Element Modeling of the Forging Process with Automatic Remeshing[J].J.Mater Proc.Technol.,1991,27. 赵国群等.;金属成形有限元分析中的网格重划分问题[J];模具技术;1991(1)
- lumped element junction circulator 集总元件结环行器
- This paper presents a new finite element modeling technique for spot-welds of autobody in vehicle crash simulation. 摘要对点焊连接提出了一种新的模拟技术,即不同于传统的节点对节点模拟焊接。
- A tapered beam element model is used to simulate the behaviour of a masonry arch bridge with loading. 采用梯形梁单元分析砖石拱桥在载荷作用下的行为。
- Primary study on the construction of the finite element model of tooth and post-core. 牙齿与桩核三维有限元建模的初步探讨。
- Study Design. In vivo study of a computed tomography (CT)-based nonlinear finite element model (FEM). 研究设计:基于CT的非线性有限元模型(FEM)的体内研究。
- The principles to construct finite element model for modal analysis of the cylinder block have been obtained. 通过研究,得出了建立内燃机机体的有限元模型的一些原则。
- This paper deals with the finite element model of DWX hydraulic prop in aid of Pro/MECHANICA. 本文用Pro/MECHANICA有限元分析软件,建立了柱塞悬浮式液压支柱的有限元模型。
- One is taper section 3D beam element model, the other is 3D compounding model with solid element and shell element. 结果表明,在均布荷载与集中荷载作用下箱梁的剪力滞效应明显不同,对于地震时程反应分析而言,采用变截面三维梁单元模型计算效率较高。
- The finite element models simulating normal, pre- and post-PFO were created. 再者,可产生模拟正常、病患的股骨近端截骨术术前及术后情形的有限元素模型。
- The finite element model of a small punch test specimen of 1Cr0.5Mo steel is established. 基于小冲孔蠕变试验 ;建立 1Cr0 .;5Mo耐热钢小冲孔蠕变试样的有限元模型。
- The finite element model of the front m ember of one passenger car is created with its CATIA model. 利用轿车前梁的CATIA模型建立其有限元模型。