您要查找的是不是:
- TIANJIN ANJIN ELECTRONIC GLASS CO., LTD. 天津安津电子玻璃有限公司。
- Employed the low melt point B-Si glass as the matrix, doped the luminescence materials, and prepared the long afterglow luminescence glass. 并以硼硅酸盐低熔点玻璃为底材,掺杂该发光粉体,在一定温度下烧成,结果制得长余辉蓄光玻璃。
- Polypropylene(PP) had poor foamability because of its low melt strength. 聚丙烯(PP)熔体强度低,发泡性能差。
- Too low melt temperature: Inhomogeneous melt with cold material inside (Which cause empty parts, broken parts etc. 熔体温度太低:材料塑化不均,熔体内含冷料(从而造成充模不足,冷料,产品断裂等)
- Whereas, with excessive P addition, an extremely low melt viscosity causes balling phenomena. 但若P元素过量时, 则会因熔体粘度过低而导致球化现象。
- They also have low melt viscosities and are hard, even at elevated temperatures. 它们的熔融粘度低,即使在升温的条件下也能保持硬度。
- The state and trend of Electronic Glass Technology applied in optical communication and optoelectronics is presented. 介绍了电子玻璃在光通信领域,光电子领域等方面的应用现状及发展前景。
- This paper is mainly to study on rheological property of the low melt point multi-copolyamide so as to guide how to melt-blown the fiber web material. 研究了一种低熔点多元共聚酰胺的流变性能,为其熔喷非织造加工提供指导。
- To further increase the production,quality and product types of electronic glass fabrics,these problems must be corrected contin... 要更进一步提高我国电子级玻璃纤维布的产量、质量和品种规格,这些问题必须不断加以改进。
- Blends of Estane~? thermoplastic polyurethane(TPU) and low melt point polyester were prepared via melt blending and the blend films were prepared via blow molding. 通过熔融共混的方法制备Estane热塑性聚氨酯(TPU)和低熔点聚酯的共混物,并吹制成膜。
- At present, SLM devices adopting fiber laser are capable of building parts and inserts from low melt alloys, zinc, bronze, stainless steel and tool steel. 目前,采用固体光纤激光器的SLM设备已经能用低熔点合金、锌、青铜、不锈钢和工具钢生产零件或模具嵌件。
- Account should be taken of the low melting point of this substance. 应该考虑到这种物质的熔点低.
- Including electronic Glass Co., the world, including, with only five companies have a glass substrate production technology, which the United States accounts for about 59% of Corning's market share. 目前全球包括电子玻璃公司在内,仅有5家公司拥有玻璃基板量产技术,其中美国康宁公司占据约59%25的市场份额。
- Room temperature ionic liquid is a kind of liquid that has special properties, including low melt point, high conductivity and negligible vapor pressure.It has been used in many fields. 室温离子液体是一种具有特殊性质的液体,具有较低的熔点、良好的导电性和可以忽略的蒸气压等优点,已被应用到诸多领域。
- A halogen element, F, is major raw materials deriving fluorine compound, and because of low melting point, that is widely used in steelmaking, nonferrous metal smelting, cement, glass and ceramics. 萤石中含有卤族元素氟,是制取含氟化合物的主要原料,又由于熔点低而广泛用于炼钢、有色金属冶炼、水泥、玻璃、陶瓷。
- SHANGHAI ASAHI ELECTRONIC GLASS Co., LTD 上海旭电子玻璃有限公司
- The MCRT consists of several smaller CRTs (e.g.about 10cm) to form a stand alone CRT with a large display screen (e.g.about 100cm)by the melting technology of low melting point glass powder. 它是由多个小尺寸(如10厘米左右)的CRT,采用低熔点玻璃粉的封接技术,做成一个具有较大显示面积(如大于100厘米)的CRT。
- In a PP/epoxy blend, CB preferentially located in the epoxy phase which possessed higher polarity and lower melt viscosity, forming strong epoxy/CB interaction. 结果表明,在共混物中,炭黑优先分布在具有高极性、低熔融黏度的环氧树脂相中,形成较强的相互作用。
- Nes Style Electron Glass Fiber's Fabric Overseas 国外新型电子布
- Production of Polypropylene with Low Melt Index 低熔融指数聚丙烯的开发生产