您要查找的是不是:
- Features: Low current, low voltage,low noise. 特点:低电流,低电压,低噪声。
- Low voltage driver and low current consumption. 拥有低电压驱动;低电流消耗的特性.
- Features: Low current, High voltage. 特点:低电流,高电压。
- Features: Low current, low voltage. 特点:低电流,低电压。
- Atmospheric glow discharge in air is produced difficultly due to that the discharge is transited easily to spark discharge. 摘要空气中的大气压辉光放电通常因放电易过渡到火花状态而难以产生。
- If a spark discharge is atpresent, fuel consumption and IMEP even can be improved about 20%. 另外,在HCCI运行工况范围内,通过优化火花点火提前角,可以改善HCCI燃烧经济性和IMEP,最高可以达到20%25。
- Some low current applications require switching through a matrix. 有些小电流应用需要通过矩阵进行切换。
- This leakage current will degrade very low current measurements. 这个泄漏电流使得极低电流测量结果恶化。
- An impulse grounding mathematical model b ased on spark discharge equivalent radius of extended electrode of transmission line tower is presented. 提出了考虑火花放电等效半径的输电线路杆塔水平伸长接地体冲击接地的数值计算模型。
- The transition form streamer discharge to spark discharge was directly dependent on the magnitude of oxygen gas flow rate and detected by the light intensity of H. 实验表明放电形式对各种活性粒子的产率有明显的影响,而气体流量的大小直接决定放电形式的转变,其中氢原子发射光谱强度的变化可以直接表示这种转变。
- E. electrostatic electric shock as a result of the human body as a result of exposure to electriferous, or savings before the static spark discharge grounded. e.因静电而引起的人体触电,是由于隔绝了带电物,或补偿后静电在接地时爆发火花充电而变成的。
- Special techniques are required when switching high current or low current. 在切换大电流或小电流时,都需要专门的技术。
- Large static charges may build up in the bed causing spark discharges. 大量静电荷可能在床内积聚而引起火花放电。
- Many factors may create the deviauon of determination result for spark discharge atomic emission spectrometric analysis,such as type standard choice and processing method for test spcimen. 选择类型标样的不同、试样加工方法的不同,都可能造成直读光谱仪测定结果的偏差。
- Electrical stimulation here elicits saccades at low currents. 电刺激在低电流时就能引起跳视。
- Open fires are not allowed in places where there are spark discharges. 有火花放电的地方千万不能有明火。
- The anode gas should be humidified as much as possible, when PEMFC operated at low current density. 故PEMFC在小电流密度工作时,应该使阳极气体充分增湿;
- An SMU that has a voltmeter with high input impedance and low current source ranges may also be used. 也可以使用具有高输入阻抗的电压表和微电流源的SMU来进行测量。
- Methods The determinator was invented to detect the patients pain sensory with high voltage and low current impulse. 方法:使用高电压小电流脉冲刺激人体,在产生痛觉的同时却不会造成皮肤损伤。
- Low current matrix cards usually use triax connections to eliminate a possible shock hazard from the guard voltage. 小电流矩阵卡通常采用同轴三线连接来避免保护电压造成的电击危险。