您要查找的是不是：
- The dynamics of intragranular nucleation of ferrite in the low carbon VN alloyed steel under the compact strip production (CSP) is a new research field. 在CSP(Compact Strip Production)工艺条件下低碳钢中铁素体的晶内异质形核动力学是一个新的研究领域。
- Suitable for welding low carbon steel, low alloy steel structure. 适用于各种低碳钢、低合金钢构件的焊接。
- CFR uses low carbon, medium alloy steel as the matrix. CFR合金采用低碳、中合金钢成分为基体。
- Suitable for welding of aluminum/titanium/copper alloys, low carbon steel, low alloy steel and stainless steel. 分别对铝、钛、铜等有色金属及其合金、低碳钢、低合金钢、不锈钢等等多种材料进行高性能焊接.
- Suitable for SMWA/MMA welding of low carbon steel and low alloy steel with all kinds of electrode. 适用于所有牌号的焊条对低碳钢、普通低合金钢的手工电焊弧。
- In view of the problem of sticker breaks and seam defects of hot rolled coil and strip which are easily appeared in low carbon and high strength low alloyed steels, the causes are analyzed. 针对生产低碳、高强度低合金钢热轧卷板时易出现麻面、翘皮等质量问题，进行了现场跟踪和分析，得出该缺陷的产生与加热炉炉辊工作状况、炉辊结构等有关。
- The hot ductility of low carbon low alloy steel and mechanism of surface cracking in relation to the hot ductility have been reviewed in the paper. 本文介绍近年来有关低碳低合金钢的热延性、与热延性相关的表面裂纹以及裂纹形成机制等方面的研究结果。
- As a result, it provides basis for studying phase transformation from pearlite to austenite in low carbon alloy steel after high pressure treatment. 所得结果为研究低碳合金钢经高压处理后组织中珠光体向奥氏体转变提供一定的参考数据。
- We are specialized in producing and processing fasteners, special parts, rivet nuts and rollers of low carbon and mid carbon alloy steel in accordance with ANSI, DIN, JIS, etc. 专业生产及加工低碳,中碳,中低碳合金钢紧固件,异型件,拉母,罗拉,美,德,日制等螺母。
- However, the flaking cracks in low carbon high alloy steel are initiated in subsurface stratum, which induces no apparent effect for corrosion on flaking. 低碳高合金钢剥落裂纹起源于亚表层，腐蚀对其裂纹形成乃至剥落无明显作用。
- The microstructure and the property of two low carbon alloy steel forged parts were compared for parts after isothermal normalizing with those after ordinary normalizing. 研究了两种合金渗碳钢锻件普通正火和等温正火的显微组织和性能。
- Suitable for welding of pulse MIG/DC MAG/CO2/flux-core wire/Electric arc welding, and for welding of aluminum/titanium/copper alloys, low carbon steel, low alloy steel and stainless steel, as well as thin plate and medium thickness plate. 可用脉冲MIG/直流MAG/CO2/药芯焊丝/电弧焊等，分别对铝、钛、铜等有色金属及其合金、低碳钢、低合金钢、不锈钢等等多种材料进行高性能焊接以及薄板高速焊接和中厚板粗丝大电流高效焊等.
- The corrosive impact wear behavior and mechanism of high manganese steel and low carbon high alloy steel as new liner material were investigated under impact energy of 2.0J in acid-ironstone slurry. 研究了在酸性铁矿石浆料及2.;0J冲击功条件下;高锰钢及新型低碳高合金钢衬板的冲击腐蚀磨损性能和机制。
- In this paper, the method of carburization during casting is used to manufacture casting with wearresistance by laying graphite pieces into the mould and pouring low carbon and low alloy steel. 采用在铸型中放置石墨片，然后浇注低碳合金钢的方法，制造表面耐磨材料。
- Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel. 比较两种材料试样在一定时间内的失重变化情况,表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
- the low carbon and low alloy steel 低碳微合金钢
- We don't make cutting tools from low carbon steel. 我们不用低碳钢制造切削刀具。
- Under 2.7J impact work, the abrasion of medium carbon alloys are deep flaking while that of low carbon high alloy steels are shallow flaking and the mass wear is lower. 2.;7J冲击功下，中碳合金钢以深层剥落为主，低碳高合金钢以浅层剥落为主，磨损失重小；
- For welding low carbon steel structres. 焊接低碳钢结构。
- Galvanized Low Carbon Steel Wire. 镀锌底碳钢丝。
