您要查找的是不是：
- low alloy steel tube 低合金钢管
- Welding of importand low alloy steel structures. 用于焊接重要的低合金钢结构。
- Suitable for welding low carbon steel, low alloy steel structure. 适用于各种低碳钢、低合金钢构件的焊接。
- Development and Application of Lower Alloy Steel Tubes for Pres sure Vessel 压力容器用低合金钢管的开发和应用
- Welding of important low alloy steel structures such as boiler, pressure vessels with suitable wires. 配合适当焊丝,可以焊接低合金钢重要结构,如锅炉、压力容器等。
- Welding of important low alloy steel structures such as boiler, pressure vessels, etc. 焊兿钢重要得低合金钢结构,如锅炉、压力容器等。
- Suitable for SMWA/MMA welding of low cabon steel and low alloy steel with all kinds of eiectrodes. 适用于所有品牌的焊条对低碳钢，普通低合金钢的手工电弧焊。
- The dissimilar metals of C4 Ni-base alloy and X60 steel were welded using low alloy steel as filler material. 采用低合金钢焊丝焊接C4镍基合金/X60钢异种金属。利用扫描电镜分析焊接接头微观组织;
- Suitable for SMWA/MMA welding of low carbon steel and low alloy steel with all kinds of electrode. 适用于所有牌号的焊条对低碳钢、普通低合金钢的手工电焊弧。
- Low alloy steel bolted tube assemblies 低合金钢螺栓连接管道组件
- We smell more than sixty kinds of steel here, such as low alloy steel, carbon structural steel and shipbuilding carbon steel. 这儿冶炼六十多种钢，如低合金钢、碳素结构钢和船用碳素钢等。
- The formation mechanism of adiabatic shear band(ASB) produced by high speed penetration in 30MnCrNiMoB low alloy steel was studied. 研究了30MnCrNiMoB低合金钢在穿甲弹冲击下绝热剪切带（ASB）的形成机制。
- The hot ductility of low carbon low alloy steel and mechanism of surface cracking in relation to the hot ductility have been reviewed in the paper. 本文介绍近年来有关低碳低合金钢的热延性、与热延性相关的表面裂纹以及裂纹形成机制等方面的研究结果。
- In this paper,a component of low alloy steel was prepared by powder injection molding(PIM) using element powders as the raw materials. 以元素粉为原料,研究了利用注射成形技术生产低合金钢支持块的工艺。
- The company uses advanced water glass wax casting process, the production of carbon steel, low alloy steel castings precision materials. 本公司采用先进的水玻璃石蜡铸造工艺，生产普碳钢、低合金钢材质的精密铸钢件。
- Microstructure and microhardness of adiabatic shear band(ASB) and those near ASB in medium carbon Cr-Ni-Mo-V ultra-high strength low alloy steel plate have been investigated. 测量了中碳Cr-Ni-Mo-V系低合金超高强度钢中绝热剪切带(ASB)及其周围金属的显微硬度,观察了其微观组织。
- The contents of element Al,Al i and Al s in low alloy steel were determined by peak integration method spectra (PIMS) on photoelectric direct reading spectrometer. 在直读光谱仪上,用峰值积分法测定低合金钢中铝、酸溶铝和酸不溶铝的含量。
- Submerged arc welding of high strength low alloy steel WDL610D is researched by using new developing welding wire WS03 and matching agglomerated flux SJ101. 采用试制埋弧焊丝WS03，匹配烧结焊剂SJ101，对低合金高强钢WDL610D进行了埋弧焊工艺适应性研究。
- Basing on the serious corrosion damage of our steel-car structure recommendation is made for wide adoption of air-corrosionproof low alloy steel in car construction. 并根据我国客货车钢结构严重腐蚀的状况,建议在铁道车辆上广泛采用耐大气腐蚀的低合金钢。
- The contents of element Al,Ali and Als in low alloy steel were determined by peak integration method spectra (PIMS) on photoelectric direct reading spectrometer. 在直读光谱仪上，用峰值积分法测定低合金钢中铝、酸溶铝和酸不溶铝的含量。
