您要查找的是不是:
- Loose plate steel pipe flanges with weld-on collar wi. 凹凸面平焊环松套板式钢制管法兰。
- As a result, it is necessary and exigent for us to study the transfer story of tall buildings, especially the thick plate transfer story. 而且从受力方面考虑,往往需要在柱与柱,柱与墙之间配筋加强,相当于设置暗梁,增加了配筋量。
- Loose plate steel pipe flanges with lapped end 翻边环板式松套钢制管法兰
- Resin Transfer Molding(RTM) is the fast developing process for manufacturing fiber reinforced composite recently. 树脂传递模塑工艺(Resin Transfer Molding,RTM)是近年来纤维增强树脂基复合材料制备工艺中发展较快的工艺。
- Letterset: A relief plate transfers the image to a blanket and thence on to the paper. Also called Dry offset, Offset letterpress, and Indirest letterpress. 干柯式:间接凸版式印刷方式。印纹先印于胶布然后从胶布转印于纸上。
- This paper addresses the Resin Transfer Molding (RTM) process.The governing equations of resin flow are presented. 介绍了RTM工艺过程及特点,给出了树脂渗流控制方程。
- Loose plate steel pipe flanges with male and female face 凹凸面平焊环板式松套钢制管法兰
- Letterset A relief plate transfers the image to a blanket and thence on to the paper. Also called Dry offset, Offset letterpress, and Indirest letter-press. 间接凸版式印刷方式。印纹先印于胶布然后从胶布转印于纸上。
- A Green Groud-Source Heat Pump System and It's Heat Transfer Mold 一种绿色地源热泵系统及其换热模型
- Loose plate steel pipe flanges with tongue and groove face 榫槽面平焊环板式松套钢制管法兰
- Burkhard, F., Modeling of three-dimensional flow in injection and resin transfer molding processes, Ph.D. University of Delaware, (1993). 苏绍安,非印刷式背光模组光学模拟分析,硕士论文,中华大学电机工程学研究所,新竹(2001)。
- Loose plate steel pipe flanges with weld-on collar with raised face 突面平焊环板式松套钢制管法兰
- Bind the rope fast lest it should come loose. 把绳子绑牢,免得它松脱。
- Loose plate steel flanges with copper alloy welding neck collar 铜合金对焊环松套板式钢法兰
- Considerable amount of work has been carried out on the development of resin transfer molding(RTM)as a viable processing alternative to autoclaving molding techniques . 树脂转移模塑工艺(RTM)产生以来,以其经济性优势开始替代热压罐的成形方法。
- The testpiece is then cured through Resin Transfer Molding(RTM) process.The sensing performance of the braided optic fiber,under bend loads is also studied. 将光纤成功地编入三维编织复合材料试件并通过树脂传递模塑(RTM)工艺成型。
- The tractor has make deep furrow in the loose sand. 曳引机在松软的沙土上留下了深深的车辙。
- Still the loose ends of the war need to be tied up. 战后尚未解决的一些零星问题仍然需要完成。
- In this paper,the principle of Resin Transfer Molding (RTM) technology for composite processing is introduced,and the requirement of the resins for RTM is discussed. 简要介绍树脂传递模塑工艺(RTM)的基本原理、优点及适用树脂的特性;
- The loose board in the floor should be nailed down. 地板中松了的板子应该用钉子钉牢。