您要查找的是不是:
- lock washer type spring 定片式弹簧
- Early lock washer on left, as used on the 600 series. 左边是早期的固定垫圈,使用在600系列上。
- To replace diaphragm; loosen lock nut (48) and remove lock washer (46), diaphragm plate (60) and diaphragm (20). 要更换隔膜,先松开锁紧螺母(48),并拆卸锁紧垫圈(46),隔膜板(60)和隔膜(20)。
- Hold stem (27) on wrench flats and remove nut (51), lock washer (46), diaphragm plate (60) and diaphragm. 在扳手的平面上握住阀杆(27)并拆卸螺母(51),锁紧垫圈(46),隔膜板(60)和隔膜。
- Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem. 松开和拆卸隔膜锁紧螺母和锁紧垫圈,从阀杆上往下压阀盘和隔膜。
- Single coil spring lock washer for assembly 组合件用弹簧垫圈
- Hangzhou Zhengda Spring Lock Washer Co., Ltd 杭州正大弹簧垫圈有限公司
- Disassemble module. Use wrench to loosen stem nut and remove lock washer and diaphragm plate. Remove yoke by loosening disc holder using a screw driver. 拆卸模块。使用扳手松开阀杆螺母,并且拆卸锁紧垫圈和隔膜板。采用螺丝刀,通过松开阀瓣支架来拆卸轭架。
- The company not only product switch electrics but also researching every type spring mechanism.thus greatly increase various electrical and mechanical properties. 我单位除制造开关电器以外,还自行研制生产各种弹簧机构。
- Hexagon head bolt and single coil spring lock washer assemblies GB/T9074.;15-1988六角头螺栓和弹簧垫圈组合件
- Smaller sizes use a lock nut with a locking washer (a), larger sizes use a nut with locking clip (b). 小尺寸轴承使用带锁紧垫圈的锁紧螺母(a)大尺寸的轴承使用带锁紧卡箍的锁紧螺母(b)。
- This circuit breaker is handcart type, reasonable structure, convenient maintenance, safe usage. With CD10II type electromagnetism operation mechanism of CT19II type spring operation mechanism. 本断路器为手车式,结构合理,维护简便,使用安全可靠。配用CD10II型电磁操动机构或CT19II型弹簧操作机构。
- Hexagon head bolt, single coil spring lock washer and plain washer assemblies 六角头螺栓,弹簧垫圈和平垫圈组合件
- lock washer with tongue at outside 外舌止动垫圈
- A wedge-shaped block used to lock type in a chase. 版楔用来将铅字锁固在活版架中的楔形块
- Serrated lock washer external teeth for assembly 组合件用外锯齿锁紧垫圈
- Washers for bolts with heavy type spring pins 重型加厚垫圈
- front wheel bearing nut lock washer 前轮毂轴承螺帽锁紧垫圈
- Washers for bolts with heavy type spring pinss 重型弹性圆柱销用垫圈
- lock washer with tongue at inside 内舌止动垫圈