您要查找的是不是：
- lock bolt with shotcrete 喷锚网
- Effects of Time and Space on Lock Bolt Support with Shotcrete 喷锚支护的时间效应与空间效应
- Application of Lock Bolt Support with Shotcrete in Realignment Project of Urban Channels 喷锚支护在城市渠道整治工程中的应用
- Implementation of the lock bolt support with shotcrete in tunnels on the Dabao Express 大保高速公路隧道锚喷支护技术的实践
- Side view of hexagonal socket bolt with adjustable thread length. 螺纹长度可调整的六角插口螺栓的侧面图。
- Side view of square head bolt with adjustable thread length. 螺纹长度可调整的方头螺栓侧面图。
- Side view of hexagonal head bolt with adjustable thread length. 螺纹长度可调整的六角头螺栓的侧面图。
- BLACK MILD STEEL HEXAGON BOLTS WITH NUTS B.S. 英制六角螺闩。
- They mayor may have bolted with taxpayer's money. 市长可能卷着纳税人的钱逃跑了。
- Bolts with drilled or undersize heads shall not be used. 被钻孔或头部尺寸太小的螺栓不能使用。
- After loosening bolts with a 9/16" socket, remove bolts completly. 在用9/16英寸套筒松开螺栓后，将螺栓完全拆卸下来。
- Turn the locking bolt so that it is fixed on the bake cover or the flange plate. 安装后必须将锁紧螺母锁紧在电机后端盖或法兰盘上。
- Available as an option is a gearshift knob dressed in suede-leather as well as aluminum door lock bolts. 可作为一种选择是一个球形换档杆身穿麂皮，皮革以及铝门锁螺栓。
- Someone has been tampering with the lock. 有人乱动过这把锁。
- According to the geology and terrain, two separate subsections of support were adopted: one is piles in row with grouting-bolts; the other is slope with shotcrete and wire mesh. 武汉某地下车库基坑处于深厚淤泥中,采用排桩+土层锚杆支护与放坡+网喷分段支护方式,本文根据现场地质、地形条件,对本工程支护过程中支护桩与土体变形作了具体分析。
- Unscrew the locking bolt of the valve handle.Rotatc the valve handle clockwise tobegin discharge. 然后卸门手柄上的锁闭螺丝，再将阀门手柄顺时针扳动以开始放料。
- To secure or lock with or as if with a bolt. 栓住，锁用或好象用锁固定或锁住
- Note: For lugged through bolting with other drillings, consult factory. 注：对于其它螺栓孔形式的贯穿式螺栓法兰连接方式，请咨询工厂。
- When this sprocket/bearing failed, the retaining plate and bolt with the safety lanyard failed also and this allowed the assembly to drop to the floor. 当这个部位的链轮/轴承坏了的时候，用安全绳固定的印版和螺栓也坏了导致整个印机掉在地上。
- The relation formula for the largest radius of rounded root of bolt with the cutting depth at the root of the nut, and the pitch of the nut is given. 摘要推导出螺栓螺纹根部最大圈弧半径与螺母螺纹小径处的削平高度、螺距的关系，探讨了增大圆弧半径的途径；
