您要查找的是不是:
- Application of Load Current Feedback Compensating in Digital Voltage Regulation for Doubly Salient Brushless DC Generator 负载电流反馈补偿法在双凸极无刷直流发电机数字调压器中的应用
- load current feedback 负载电流反馈
- Load current is set in 1.56% increments of the maximum value. 负载电流在最大值增量的1.;56%25中设置。
- Moisture proof and no contact output, Load current 1A max. 具防潮功能并且采用无接点方式,限时控制负载电流最大1A.
- It is a full symmetrically, current feedback amplifier followed by a diamond buffer that runs open loop. 这是一个完全对称,电流反馈放大器之后,钻石缓冲开环运行。
- A novel active power filter control algorithm based on DC capacitor voltage control and compensation current feedback control is proposed. 提出了一种基于直流侧电容电压控制和补偿电流反馈控制的电力有源滤波器新型控制算法。
- At same time, the application of active current feedback data amplifier is introduced in amplifying signal of transducer. 同时介绍了有源电流反馈数据放大器在传感器信号放大中的应用。
- New analogue divider circuits using current feedback operation amplifiers (CFOA) are presented.Simulated analysis is given by PSPICE. 给出了由电流反馈运算放大器构成的新型模拟除法器,并用PSPICE进行了仿真分析.
- When ordering overload relays, specify horsepower, voltage and full load current per motor nameplate. 订购过载继电器时,请注明每台电机的功率马力、电压和满载电流。
- This paper proposes a novel control strategy based on a new current feedback for grid-connected voltage source inverters (VSI) with an LCL-filter. 针对LCL滤波的并网逆变器电流控制时存在的系统稳定性和稳态误差与谐波失真等问题,提出了一种新的电流反馈控制技术。
- The load current is handled directly by the controller through semiconductor switching devices. 负荷电流由调节器通过半导体开关元件直接控制。
- The DSP is responsible for parameter and register read/write, optical encoder and current feedback signal processing, and PWM signal generation. DSP系统主要负责参数与暂存器写入与读取、光编码器解码、电流回授讯号、以及PWM讯号之产生。
- The peak load current limit is set by the user's selection of a reference voltage and current-sensing resistors. 用户可通过选择参考电压和电流感测电阻设置峰值载荷电流限制。
- Current-mode DC/DC converter adds a current feedback loop on the base of voltage-mode control, achieving both current and voltage feedback loop control. 电流模式DC/DC变换技术是在电压模式控制的基础上,增加了电流反馈环,实现了电压和电流的双环反馈控制。
- An "Overcurrent Relay" is a type of protective relay which operates when the load current exceeds a preset value. 过电流继电器是继电保护装置的一种,当负载电流超过整定值时,继电器动作。
- In the power source,a PWM technology is adopted,the PI algorithm with current feedback is used to adjust the volt-ampere output characteristic of the power source. 焊接电源采用PWM控制技术;通过电流反馈PI控制算法调节电源输出外特性.
- Choosing the load current phasor as the reference for the phasor diagram analysis is straightforward and effective. 以负载电流相量为参考的新的相量图分析方法是简洁有效的;
- Current feedback from the analog-to-digital converter and position feedback from the quadrature encoder can be directly interfaced to the developed motor control IC. 在周边处理能力方面,可直接将电流回授量及速度回授量由类比/数位转换器及增量光编码器取得, 不需透过微处理器。
- Abstract: A circuit of CMOS transresistance amplifier based on current feedback amplifier and its principle are introduced.The circuit is used to implement DVD OPIC. 摘 要: 本文介绍用电流反馈放大器构成的CMOS互阻放大器电路及工作原理,并将其应用于DVD光捡拾集成电路设计中。