您要查找的是不是：
- Coating method:Rubber roll coating method. 涂布方式：胶辊涂布方式。
- Pigments, that are completely wet by the liquid coating system and correspond to the basic requirements obligatory for coloration, suc... 颜料被认为是最合适的着色剂,它能被液化涂层体系完全润湿且满足染色必需的基本要求,诸如色牢度。
- Dip coating: Coating method in which the web is passed around a roller immersed in solution. 浸渍涂布:纸卷绕过一浸于涂面溶液的轴而加上涂层的方法。
- PSf/PEO-AgBF_4/SR asymmetric hollow fiber membranes were prepared using double coating method. 用“二次涂层”方法制备了涂层含银离子的PSf/PEO-AgBF_4/SR非对称中空纤维复合膜。
- The roll coater consists of roll that (1) support the strip and (2) pick up, meter, and deposit liquid coating onto the metal strip as it moves through the coater. 辊子机组由1支撑辊，2浸料、计量辊，将液体涂布物涂布在钢带上，当钢带经过辊子机组。
- The pick-up roll is partially submerged in the paint, conversion coating, or other liquid coating, and moves the coating form the pan to the transfer or applicator roll. 浸料辊部份浸在涂料中，转移涂料，或其它液体涂布物。从漆槽中转移涂料到涂布辊中。
- Compared with traditional coating, this coating method will not result in phenomena like over-coating or coating rebound, so paint loss is cut down. 与传统式空气喷涂方法相比,级减少喷涂过量及反弹现象,从而减少涂料损失。
- Blade coating Paper coating method where a surplus of coating is applied to the web and then levelled and controlled by a flexible steel blade. 刮刀涂布一种涂布方法。把大量的涂剂放于纸卷上面,然后把多余的涂剂用软性刮刀刮去,同时平滑涂层表面。
- Brush coating Method of coating a web of paper where the coating mix is distributed by a set of stationary and oscillating brushes. 手刷涂布在纸捲上加上涂层的方法。用一套固定和摆动毛刷把涂剂均匀的分佈。
- Blade coating: Paper coating method where a surplus of coating is applied to the web and then leveled and controlled by a flexible steel blade. 刮刀涂布:一种涂布方法。把大量的涂剂放于纸卷上面，然后把多余的涂剂用软性刮刀刮去，同时平滑涂层表面。
- Many expert French polishers will add additional body coats after the final leveling and then use a liquid abrasive/polishing compound in place of using the glaze coat method that we use. 很多专业涂漆师会在最终磨平后再建立一点漆的厚度，然后用液体研磨剂/上光剂来上光而取代我们这里的抛光步骤。
- Method: Using microcrystalline cellulose and sodium starch carboxy methyl as the important adjuvant, wet granulation and tableting, Rolling coating method for coating. 方法:以微晶纤维素、羧甲基淀粉钠等为主要辅料,以湿法制粒压片,用滚转包衣法包衣。
- The preparation of WO 3 thin films has been reported using a sol gel process together with the dip coating method, and tungsten powder being the raw material. 以金属 W粉为无机原料 ,溶胶 -凝胶技术结合浸渍镀膜方法制备出 WO3 薄膜 ,借助 SEM、可见光分光光度计、椭偏仪等仪器测量了薄膜的特性。
- The preparation of nano porous tungsten oxide films has been reported using a sol-gel process with the starting tungsten powders together with the dip coating method. 以金属W粉为无机原料 ;采用溶胶 -凝胶技术 ;结合浸渍镀膜方法 ;制备出纳米多孔WO3薄膜 ;研究了热处理对薄膜性能的影响 .
- The solvent will move upward by siphonic action，the support or liquid coated on it retard the analytes' migration by adsorption or partition or something others actions. 溶剂会通过虹吸作用上行，载体和涂布在载体上的液体通过吸附、分配或其它作用阻碍溶质移动。
- With SnCl_45H_2O, (Sb_2O_3) and (Gd(NO_3)_3) as the raw material, the SnO_2/Sb DSA electrodes doped Gd were prepared by Dip coating method and sol-gel method. 分别采用浸渍法、溶胶-凝胶法;SnCl4.;5H2O;Sb2O3和Gd(NO3)3为原料;制备了稀土Gd掺杂SnO2/Sb涂层电催化电极
- Propeties and applications of thermoset powder coatings are addressed,along with the comparative advantages of powder versus liquid coatings,and future developments in powder... 叙述了热固性粉料的性能与应用、粉末涂料相对于液体涂料的优点与粉末涂料的未来发展。
- This article compares dry spreading technique with coating method of CCCW applied in prefabrication pipe sections, which are used in shield construction. 对比介绍了水泥基渗透结晶型防水材料(CCCW)在地铁盾构法施工预制管片生产中的干撒法和涂刷法两种施工工艺。
- Objective To enhance the oral bioavailability of breviscapine and investigate the feasibility of preparing the proliposome of breviscapine by fluidized bed coating method. 目的提高灯盏花素口服生物利用度,考察流化床包衣法制备灯盏花素前体脂质体的可行性。
- Compared with the results from photoelastic coating method, the correcting formula of mismatch of Poisson's ratio in curve boundary of this laminate was developed. 并 与光弹贴片法测试结果进行比较，从而对曲边界对泊松比系数不匹配 效应的影响进行了讨论。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
