您要查找的是不是:
- Effects of Wall Thickness of SEN on Liquid Steel Flow Field and Temperature Field in Mould SEN壁厚对结晶器内钢液流场和温度场的影响
- liquid steel flow field 钢液流场
- The results indicate that steel flow field in the tundish with this structure is reasonable, which can avoid the slag involing in steel liquid to flow into mol... 可避免钢渣卷入钢液流向水口进入结晶器,也有利于钢液内的夹杂上浮排除。
- The multiple versions of EMS in the continuous casting of flat products are reviewed and classified with respect to liquid steel flow pattern and metallurgical results. 回顾了电磁搅拌应用于扁平产品连铸生产中的各种形式,并按液态钢水流动形态和冶金效果给予分类。
- A casting blank solidification model was presented in which both thermal transference and liquid steel flow dynamics in the solidifying blank were considered. 为了克服仅仅以铸坯热平衡为基础进行建模的不足,针对传热、钢水流动和凝固三种现象,建立起铸坯凝固过程的数学模型。
- Most methods were adopted to research the steel flow pattern, inclusion trajectories and fluid flow field with and without flow control devices. 中间包实验采用数理模拟的研究方法对各种控流装置条件下中间包内钢液的流动模式、夹杂物模式以及流场等方面进行研究。
- The application situation of tundish current regulator in Demark continuous caster is studied and the influence of it on liquid steel flow state and the average time of liquid steel stopping in tundish are analyzed. 对中间包稳流器在德马克连铸机上的应用情况进行了研究,分析了其对钢液流动状态和钢水在中间包内平均停留时间的影响。
- Based on the columm coordinate program of axisymmetry three dimension turbulent flow field,a program of nonaxisymmetry three dimension turbulent flow field which is applied to simulate molten steel flow in ladle is developed. 在对称的圆柱坐标三维湍流流动场程序的基础上,开发了非轴对称圆柱坐标三维湍流流动程序,并用该程序模拟计算了rh 真空精炼过程中钢包内钢液的流动过程
- The effect of different operation parameters on the molten steel flow in the mould in No.2 Steelmaking Plant, WISCO has been studied via the three-dimensional flow field software developed by the authors. 利用开发的三维流场计算软件,研究了操作参数对武钢二炼钢板坯连铸机结晶器内钢液流动的影响。
- Mathematical Simulation for the Flow Field of Liquid Steel in the Vacuum Chamber of RH and Ladle during RH-Degassing RH真空室熔池和钢包内钢液整体流场的数学模拟
- Study on turbulent flow field of liquid steel and its electromagnetic control in continuous casting mold at high casting speed 高拉速时连铸结晶器内钢液湍流场及其电磁控制研究
- The teeming time and height affect flow field too. 并分析了流体注入时间、注入高度对流场的影响。
- liquid steel flow 钢液流动
- They filled the mold with liquid steel and let it cool. 他们在模具中填上液态钢,让它冷却。
- Liquid Steel Flow Behavior 钢液流动行为
- Error: gui-monitor-residuals: Uninitialized flow field. 直译就是流场没有初始化!!!!重新初始化。
- Fluid pressure signal validates result of flow field computation. 液体压力信号验证流场建模与计算的结果。
- Steel Flow Field 钢水流场
- The principle and method to measure directly the main flow velocity of liquid steel ina 60 tons argon-stirred ladle by a probe(an immersed body)were introduced in the paper. 本文介绍利用紊流下形阻系数近于常数的条件,对60t吹氩钢包内的主流股流速进行实际测量的原理、方法和结果。
- Because, the movement track of liquid steel is improved by the argon bubbling and route of fluid flow is much more flexuous and close to the bath surface. 吹氩形成的微气泡群可以显著改善中间包内流体的运动轨迹,流体运动的路线更加曲折,并且全程流动靠近液体表面。