您要查找的是不是：
- Which of the test part characteristics listed below are normally considered before the specific liquid penetrant test method is selected? 选择液体渗透试制方法时，通常要考虑下面列出的哪些零件特性？
- liquid penetrating test [化] 渗透探伤
- 3.Which of the test part characteristics listed below are normally considered before the specific liquid penetrant test method is selected? 选择液体渗透试验方法时，通常要考虑下面列出的哪些零件特性？
- Method for liquid penetrant testing and classification of the indication 液体渗透探伤测试方法及表示方法分类
- The relation between viscosity and flow rate of liquid penetrating through porous material was investigated by using available datu. 利用现有的资料，对液体透过多孔材料时的液体粘度与流量的关系进行了研究。
- dye liquid penetration test 着色探伤
- liquid penetrant test 着色探伤,渗液探伤试验
- liquid penetration test 液体渗透试验
- It is concluded that the liquid penetrating time greatly decreases,and the tactility,soft and antistatic properties have been improved while the mechanical properties have been slightly changed. 经处理后的非织造布的透水时间大大缩短，其透气性、抗静电性和柔软性都得到明显的改善，而机械性能基本不变。
- Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing 磁粉和渗透检验中目视校验计较准方法的确认
- Simulated by WSI at 5G position, the INCONEL 52M TIG weld passed Liquid Penetrant inspection (LP) and Ultrasonic test (UT) thoroughly, no any defects observed. 经WSI模拟5G位置TIG焊测试,INCONEL52M的TIG 焊缝完全通过液体渗透探伤(LP)和超声波探伤(UT),未发现任何缺陷。
- Non-destructive testing -- Penetrant testing -- Part 1: General principles -- Method for liquid penetrant testing and classification of the penetrant indication 渗透性检验。第1部分:总则。液体渗透检验方法和渗透指示的分类
- The relation between damage type and damage signal was discovered by supplementary detection methods such as stereology microscopy, optical microscopy and coloring penetrating testing. 借助体视显微镜、光学显微镜和着色法等辅助检测方法,使损伤类型与损伤信号一一对应。
- Simulation of penetration test of armoured plate is presented by explicit dynamics algorithm. 摘要采用显式动力学算法对装甲材料侵彻试验的过程进行数值仿真研究。
- Penetrant testing is done according to its standard. 摘要渗透检验标准是渗透检验的依据。
- This article narrates a innovated dynamic penetration test method that mainly corroborates soil bearing capacity . 探讨了一种改进的动力触探方法,主要用于确定土的承载力。
- liquid penetrant testing(PT) 液体渗透探伤
- Founding. Liquid penetrant inspection. Part 1: sand, gravity die and low pressure die castings. 铸造。液体渗透检验。第1部分:砂模铸件、压铸件和低压模铸件。
- In addition, the compressive strength, absorption rate, rapid chloride penetration test (RCPT) and chloride ion diffusion test were performed. 此外并进行各项试验其中包括抗压强度、吸水率、快速氯离子渗透试验(RCPT)、氯离子扩散试验及混凝土电阻试验等探讨高性能混凝土的耐久性。
- Removal of defects shall be verified by magnetic particle or liquid penetrant examination. 用磁粉或渗透检测缺陷是否清除。
