您要查找的是不是：
- linear induction machine 直线感应电机
- Etc. Our experiment hardware consists of a rotary and a linear induction motor with high performance PCs. 我们的研发环境包括感应马达与线性感应马达软硬体各一套,与高性能个人电脑数部。
- As the line 4 trains are equipped with linear induction motors, the track disposes of so called “Reactionplates”. 由于4号线使用直线电机系统，轨道中间的就是所谓的“反应板”。
- The induction machine will produce a generating torque, that is a torque acting opposite to the rotation of the rotor. 此时，感应电动机将产生一个发电机转矩，即与转子旋转方向相反的转矩。
- Taking a six phase induction machine as example, the levitation principle and winding configurations were analyzed. 以单绕组六相感应电机为例，分析了单绕组多相无轴承电机的悬浮原理和绕组结构等问题。
- The mathematicalmodel of the linear induction motor is built with Matlab/Simulink and its slip frequency control is simulated. 采用Matlab/Simulink构建了直线感应电机数学模型并对其转差频率控制进行了仿真。
- Dynamic end effect of single sided linear induction motor (SLIM) is caused by the eddy current in the secondary with the increase of SLIM speed. 研究直线感应电动机动态边端效应特性可知,电机次级涡流是产生动态边端效应的主要原因。
- This paper also investigated the influence of the zero vector and PWM switching frequency on the acoustic noise radiated by induction machine. 选择适当的PWM开关频率能有效地降低电机的噪声·
- The vector control mathematical model of linear induction motor is established under the synchronization reference frame. 在同步旋转坐标系下,建立了直线感应电动机的矢量控制数学模型。
- Unlike dc machines, induction machines have uniform air gap. 和直流电动机不同，感应电动机具有均匀的气隙。
- High current linear induction accelerator(LIA) is a complicated experimental physics device.It is difficult to evaluate and predict its performance. 摘要用于流体动力学诊断的强流LIA是庞大而复杂的系统，其性能预测和评估是十分困难的。
- The AC/DC/AC converter is used to control wound-rotor induction machine under motor state with double-fed control strategy (DFM). 采用交/直/交(AC/DC/AC),变换器对绕线型感应电机电动状态下的双馈控制进行研究。
- It is obvious that the squirrel-cage induction machine is simpler, more economical and more rugged than the wound-rotor induction machine. 很明显，与线绕型感应电动机相比，鼠笼型感应电动机更简单、更经济且更坚固。
- Abstract: Accurate mechanical axis alignment is a basic requirement for assembling a linear induction accelerator (LIA). 摘 要： 介绍了大型直线感应加速器机械轴精密对中安装方法和工艺。
- In the paper,the dynamic thermal field of cylindrical linear induction motor running in oscillating motion is computed by using Galerkin FEM. 用伽辽金有限元法计算了往复运动的圆筒型直线感应电动机的动态温度场。
- The proposed dynamometer can operate in both motoring and generating states by direct torque control (DTC) of the induction machine. 该测功机通过异步电机直接转矩控制可以工作在电动和发电两种状态。
- Beam diagnostic devices including beam position, beam magnitude and beam radius diagnostic devices is widely used in Linear Induction Accelerator(LIA). 在直线感应加速器中，使用的有束流位置、大小、半径等参数的诊断装置。
- E.Vasssent.Simulation of Induction Machine Operation Using Complex Magnetodynamic Finite Elements,IEEE Tran.Mag.Vol.35 No.4 July 1989. 刘徽.;异步电机电感参数的通用计算方法
- Beam Bugs and Botare used quite widely in Linear Induction Accelerator (LIA) , either for beamcurrent or for beam centroid position measurements . 在直线感应加速器中，壁电流探测器、磁探针应用得尤为广泛，两者都可以测量束流及束心位置。
- A novel SVPWM overmodulation technique for space-vector pulse width modulation (SVPWM) inverters in the field-oriented control of induction machine was proposed. 给出了一种新的SVPWM线性过调制策略,以实现磁场定向控制中更高的母线电压利用率。
