您要查找的是不是:
- Seat tightness achieved with torque as opposed to line pressure. 利用扭矩而不是管路压力来实现阀座的密封。
- Line pressure tends to relieve gasket loads during operation. 在操作期间,管道压力倾向于释放垫圈负载。
- Controlled closing of the valve, opens the mainline check valve, gradually increasing line pressure. 阀门受到控制的关闭操作,开启主管线止回阀,逐渐增加管线压力。
- Remove the throttle cable, cruise control cable (if equipped) and the transmission line pressure cable. 将节流阀电缆、车速控制电缆(若已配备)、及变速箱管线压力电缆拆下。
- Check initial pressure to see if full intended line pressure is applied at the valve inlet. 检查初始压力,看看是否全部预设管道压力是否应用在阀门进口处。
- Advantages: no pressure line of paper, cardboard single-trimming, single line pressure, the cardboard will deflect! 好处:不压线分纸、纸板单修边、单压线,纸板都不会歪斜!
- Conversely, by opening the bleed, line pressure will blow out any accumulation when the plug is lifted. 反过来,通过开启排气装置,当阀塞升起时,管路压力将吹出任何累积物。
- Open test cock No.1 and No. 3 admitting line pressure to downstream side of second check valve. 开启测试旋塞1号和3号,是管道压力传到第二止回阀的下游一侧。
- Release the paint line pressure and switch off the power before doing maintenance with the sprayer or changing accessories. 在保养喷漆枪或者更换配件之前,松开喷枪压力阀并且关闭电源。
- When this occurs, the valve disc moves to the closed position aided by the resetting shaft spring and line pressure, cutting the gas flow. 如此一来,阀门封盘藉由复归轴上的弹簧与管内压力,移到关闭位置而切断瓦斯气流。
- Watts Air Gap Drains are designed to collect water that is being discharged by the relief valve, due to minor check valve fouling and/ or line pressure fluctuations. 美国瓦茨气隙排放装置适用于收集由于第二止回阀污染和/管道压力波动而从安全阀排放出来的水。
- Watts Air Gap Drains are designed to collect water that is being discharged by the relief valve, due to minor check valve fouling and/or line pressure fluctuations. 美国瓦茨气隙排放装置适用于收集由于第二止回阀污染和/或管道压力波动而从安全阀排放出来的水。
- Connect appropriate Fuel Line Pressure Test Adapter Tool Hose (number 6631, 6923, 65or 6539) into disconnected fuel supply linInsert other end of Adaptor Tool hose into a graduated container. 把正确的燃油管道压力测试适配器工具软管(6631,6923,6541或6539)和断开的燃油供应管道连接到一起。把适配器工具软管的另一端插入到一个油刻度的容器中。
- Disconnect the accelerator cable, the cruise control cable (if equipped), and the transmission line pressure cable (if equipped) from the throttle body and remove them from the cable bracket. 从节流阀体上拆下加速器电缆、车速控制电缆(若已装备)、及变速箱管线压力电缆(若已装备),并将它们从电缆托架上拆除。
- In fabricated valves, leakage of corrosive medium due to neglected maintenance on the packing, or line pressure surges causes corrosion and failure of most carbon steel or cast iron components. 锻钢焊接装配阀门,常会由于忽视了填料的维护而导致腐蚀介质的泄漏,或管路压力波动导致腐蚀和大部分碳钢或铸铁部件损坏。
- The distinction is that they operate under full line pressure and the redial flow within the unit can be either centrifugal (outward), centripetal (inward) or a combination depending on design. 区别在于它可以在全压力下进行操作形成离心(向外)、向心(向内)或综合式的放射状浆流。
- In this work,the line pressure at fuel pump side and at injector side,nozzle needle lift and sound velocity of dimethyl ether (DME) were measured to evaluate DME injection process. 系统研究了二甲醚(DME)燃料的喷射过程,测试了不同工况下的油管泵端压力及嘴端压力、喷油器针阀升程和油管中燃料的音速。
- The vertical line meets the horizontal one here. 垂直线与水平线在此相交。
- One line cuts another at right angles. 一条线与另一条线成直角相交。
- Disconnect the accelerator cable, the cruise control cable (if equipped), and the transmission line pressure cable (if equipped) from the throttle body and remove them from the cable bracket . 从节流阀体上拆下加速器电缆、车速控制电缆(若已装备)、及变速箱管线压力电缆(若已装备),并将它们从电缆托架上拆除。