您要查找的是不是：
- Application of Light Spot Scanner Photo-Current Technique to Determination of Surface Recombination Velocity 用光探针法测量表面复合速率
- light spot scanner 光点扫描设备,光点扫描器
- In OCR, a light spot in a character surrounded by ink. 在光学字符阅读器中，在字符内由墨水包围着的空白点。
- In OCR,a light spot in a character surrounded by ink. 在光学字符阅读器中，在字符内由墨水包围着的空白点。
- Bending angle about material augments along with laser power and laser light spot diameter augment, but bending angle about material minishes along with laser scan rate and material hardness augment. 随着激光功率和激光光斑直径的增加板材弯曲角度增大,但随着激光扫描速度和板材厚度的增加弯曲角度减小。
- light spot scanning 光点扫描
- Based on the systematic study and analysis, alight spot scanner photo-current (PC) measurement technique was set up to measure the interface properties of silicon pn junction. 摘要通过系统的研究分析，建立了应用光探针的光电(PC)测量方法，应用镜像法和点源产生近似原理建立了物理模型，并进行了系统的理论分析。
- The average visual fi eld reduced with the reduction of light spot brightness when its size and color was fixed. 在光标大小、颜色一定的情况下,光标亮度由大变小,在各个子午线方向上的正常平均周边视野均递减;
- A rendering of Cornelius in this setup, with OSA=8 and Shadows enabled, gives the result in Simple Light Spot set up.. The result is ugly. 8并且激活阴影时科尼利厄斯的渲染，效果见简单聚光灯照明构件。。结果很难看。
- The SonoVue sign showed high sparkling light spot with diffused distribution in most time. 造影剂信号呈强回声光点,以闪烁方式显示,大部分时间散在分布;
- The transducer detects continuos position data of the incident light spot moving on the whole plane without dead zone. 该传感器不存在测量死区，可给出入射光点在整个光敏面上移动时的连续性位置数据。
- Draw on the laces, add in white light spots where necessary. 画上花纹,再在必要的部位点上白光点。
- The optical fiber emits a light spot from the other end. The gray distribution of the light spot is acquired by Matrix CCD camera. 光纤从一端照明,由光纤另一端出射光点,由面阵CCD摄像机获取光点的灰度分布。
- The bi-cubic interpolation applied to light spot image offer a valuable reference to the wavefront sensing in real research. 光斑图插值处理的研究为在实验中提高波前探测精度提供了有益的参考。
- Detecting and calculating accuracy of centroid of light spot is an important factor which affects the detecting accuracy of Hartmann wavefront sensor. 子孔径光斑的形心探测和计算精度是影响哈特曼传感器波像差探测精度的重要因素,而探测窗口的选取对探测误差的影响很大。
- In the non-axis approach, the characters of the light spot of zone plate were investigated by using the Frensnel-Kirchhoff integrating formula. 摘要基于非傍轴近似下菲涅耳-基尔霍夫积分公式，讨论了波带片在离焦条件下的光斑特性。
- The principle of position sensitive detector (PSD) is introduced, and automatic determination of the center of the intensity of light spot is analyzed. 介绍位置敏感探测器工作原理,分析了其自动取光斑重心的定位机理。
- This paper is concerned with the laser ignition performance of energetic material affected by the light spot diameter using photoelectric method. 摘要用光电探测法研究了激光光斑直径对含能材料激光点火特性的影响。
- This paper analysed the quality and efficiency of alterable laser thread length scanning in SLS RP processing as compared with the spot scanning processing. 本文分析变长线扫描选择性激光烧结快速成型工艺对点扫描工艺的质量和效率优势。
- According to beam properties of the CO2 laser in the laboratory and light spot requirement for laser sintering, a set of laser beam homogenizing equipment is designed in this. 针对实验室用大功率CO2激光的光束特性和烧结陶瓷实验时对光斑的特定要求,本研究从理论设计了一套激光均束装置。
