您要查找的是不是：
- Standard compaction test and undrained direct shear test were carried out. 实验方式是采取标准压实试验及不排水直接剪力试验。
- Standard Test Method for Lap Shear Strength of Hot-Applied Sealants 热用密封材料的搭接剪切强度的标准试验方法
- A new in-situ direct shear testing method for large-grained rockfill materials is introduced. 摘要介绍了一种适用于大颗粒堆石材料的新型现场直剪试验法。
- Variation Rule of Shear Strength Index When Direct Shear Test of Coarse-grained Soil. 粗粒土直接剪切试验抗剪强度指标变化规律。
- It is presented an experimental study on the bond behavior of NSM CFRP strips using a simple shear test set -up. 通过CFRP板条嵌入混凝土试块的界面单剪试验,研究粘结长度对界面粘结性能的影响。
- Finally use the dynamic three axle shear test to research impulsive load function under red clay mechanics and distortion characteristic. 最后通过动力三轴试验仪研究冲击荷载作用下红粘土的力学和变形特性。
- The characteristic values of micro shear test and tensile test of aluminium alloy were determined and the quantitative expression of these characteristic values were studied. 通过测定铝合金微型剪切试验和拉伸试验的性能参数,研究得出了这些性能参数之间的数学关系式。
- The interlaminar shear strength of the composites was characterized by a short beam interlaminar shear test and a double edge-notched tensile shear test. 短梁剪切失效模式为假塑性，而拉剪失效模式为非假塑性破坏。
- At present, the conventional rock body mechanical test comprises a unidirectional compression test, a unidirectional tension test, a triaxial compression test and a shear test. 目前常规的岩体力学试验主要有单向压缩试验，单向拉伸实验，三向压缩试验，和剪切试验等。
- M.Mahaney, M.Shell, R.Storde, 1991, Use of the in-process bond shear test for predicting gold wire bond failure modes in plastic packages, IEEE IRPS, pp44-51, 1991. 陈永庆，2005，应用反应曲面方法求解封装焊线制程微细间距之最佳参数，硕士论文，国立中原大学，中坜。
- First, use the he red clay original condition and the rebuilding condition separately to carry on the single axle solidifying compression test and the three axle shear test. 首先,分别对红粘土原状样和重塑样进行单轴固结压缩试验和三轴剪切试验。
- Tong Zhiquan.Research report of shear test on the frozen-unfrozen sand-clay interface and on the frozen-unfrozen clay-sand interface [R].Lanzhou: Northwest Research Institute Co. 佟治权.;砂粘土和粘砂土冻融交界面的抗剪强度试验研究报告[R]
- Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading 用拉力负荷法测定双搭接剪切粘结接头的强度特性的试验方法
- He was reared in the lap of luxury. 他在奢侈的环境中长大。
- The short-beam shear testing method for determining the interlaminar shear strength of glass-cloth/epoxy laminates at low temperatures was studied using a three-dimensional finite element analysis. 采用三维有限元法对超低温下玻璃纤维强化树脂层合板的短梁法层间剪切强度进行了研究，通过与二维有限元解析结果的对比，分析了试验片三维形状对中性面上剪切应力分布的影响；
- The runner is still going strong on the last lap. 那个赛跑运动员在跑最後一圈时仍然劲头很足。
- Cyclic simple shear tests were numerically modeled to validate the codes and show the performance of the model. 通过对循环单剪试验的模拟验证了程序的可靠性和模型的表现。
- The inherent anisotropy of sands was investigated firstly through the shear tests with fixed principal stress axes. 通过应力主轴固定单调剪切试验分析了所制作砂样的初始各向异性特性。
- The child sat on its mother's lap. 小孩坐在妈妈的膝上。
- Triaxial shear tests are done before and after vibratory load actings, and the testing samples are the red clay in Xiamen. 摘要以厦门某建筑工地红黏土为试样，进行振动荷载作用前、后三轴剪切对比试验。
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
