您要查找的是不是:
- Impregnation of Thermoplastic Resin in Jute Fiber Mat 热塑性树脂浸渍黄麻纤维毡的研究
- jute fiber mat 麻纤维毡
- The temperature resistance of jute fiber reinforced polypropylene composite increase with increasing fiber content. 黄麻纤维增强复合材料的耐热性随纤维含量增加而递增。
- The jute fiber is one kind of natural fiber,with the features of good properties,high yield and low price. 黄麻纤维是一种性能优良、产量高、价格低廉的天然纤维。
- It shows that the fiber mat keeps integrity during flow and the GMT has good fluidity for molding. 研究表明:GMT材料具有很好的充模流动性,流动过程中纤维毡保持一个整体;
- The composite will get the best properties while it consists of 40% PP fiber, 30% jute fiber and 30% wood fiber. 当PP纤维含量为40%25、麻纤维为30%25、木纤维30%25时,复合材料的性能较佳。
- Pan-based carbon fiber mat has temperature sensibility.The resistances of the samples decrease with the incr... 碳纤维毡具有温敏效应,随温度升高碳纤维毡的电阻率线性降低;
- Melt flow through glass fiber mat during GMT melt impregnation [J].Acta Materiae Compositae Sinica, 2000, 17(3): 28-32. GMT熔融浸渍中熔体在玻纤毡中的流动[J].;复合材料学报;2000;17(3):28-32
- Loose hemp or jute fiber,sometimes treated with tar,creosote,or asphalt,used chiefly for caulking seams in wooden ships and packing pipe joints. 麻絮,埋絮疏松的大麻或黄麻纤维,有时涂上焦油、杂酚或沥青作保护层,主要用于木船上捻缝和填塞管子接头
- PP/GMT sheets reinforcement: Glass fiber mat [J].Acta Materiae Compositae Sinica, 2002, 19(4): 38-41. PP/GMT片材骨架材料--玻纤毡[J].;复合材料学报;2002;19(4):38-41
- Loose hemp or jute fiber, sometimes treated with tar, creosote, or asphalt, used chiefly for caulking seams in wooden ships and packing pipe joints. 麻絮,埋絮疏松的大麻或黄麻纤维,有时涂上焦油、杂酚或沥青作保护层,主要用于木船上捻缝和填塞管子接头
- Increasing jute fiber can improve the MOR and MOE of the composites obviously, but the water resistance properties are decreased at the same time. 麻纤维含量增加对提高材料的强度影响显著,但耐水性略有下降。
- These resins are applied to a glass fiber mat and are eventually used to manufacture heat resisting electrical insulators. 这些树脂使用在玻璃纤维布上,最终生产出耐高温的绝缘套管。
- The properties including bulging rate,breaking elongation rate and breaking strength of the jute fiber were tested under the different conditions. 分别测定了不同工艺条件下黄麻纤维的膨化率、断裂伸长率、断裂强力的变化。
- PP/GMT (Glass Mat Reinforced Polypropylene Sheet) are made from continuous glass fiber mat or needle mat reinforce modified Polypropylene matrix. PP/GMT(Glass Mat Reinforced Polypropylene Sheet)复合材料是连续玻璃纤维毡或连续玻璃纤维针刺毡为增强材料与改性聚丙烯为基体复合而成的一种片材。
- The jute fiber was treated by two different methods: built additive auxiliary reagents pretreatment,alkali treatment,water treatment. 对黄麻纤维进行三种预处理:复配助剂处理、碱处理、水处理。
- Glass fiber mat is taking the method of the Dutch wet process mat which has good heat preservation, noisedamping, heat insulation and so on. 玻璃纤维薄毡是采用德国湿法薄毡生产工艺,是良好的保温、消音、隔热、绝缘材料。
- The experimental results indicates that the bulging rate elongation rate of jute fiber treated by built additive pretreatment increased significantl... 实验结果表明,经过复配助剂预处理的黄麻工艺纤维的膨化率显著提高,断裂强力适中,断裂伸长率显著提高。
- The application possibility of non-woven noil ramie fiber mat in composites was also discussed.The non-woven noil ramie fiber mat manufactured can ... 所制得的苎麻落麻纤维无纺毡既可作为复合材料的表面毡使用,又可作为复合材料增强毡使用。
- The effect of electro-spinning technology to the mechanical properties of nanometer poly (vinyl alcohol) (PVA) fiber mat was researched. 摘要研究了静电纺工艺条件对聚乙烯醇(PVA)纳米纤维毡力学性能的影响。