您要查找的是不是：
- joint welding sequence 接焊次序
- Selecting the right welding sequence. 选择合理的焊接顺序。
- A design approach to the 3D CAD of welded machine is presented in this thesis, in which the rules of bar orientation, joint processing and welding sequence are stressed. 本文提出了一个面向焊接机架的三维CAD方法，着重研究混合型钢结构的杆件布置、节点处理和焊接顺序自动生成方法。
- This product require full penetration, double groove,back gouged after welding,and follow the welding sequence. 本产品要求全焊透，开设双面坡口，正面焊妥后背面碳刨清根后按顺序施焊；
- Different assembly?welding sequence may result different risidual deformation,we usually take fixup by spot welding first, then take welding symmetrically. 不同的装配?焊接顺序，焊后产生不同的残余变形，一般是先点固，再进行对称焊接。
- The analysis showed that overside of parameter in furnace tube joint welding,and unsuitable choices of the welding material were the main reason of the joint failure. 分析结果表明,炉管接头焊接工艺参数过大,焊接材料选择不当,是引起炉管焊接接头失效的主要原因。
- The rupture reasons of tube joint weld of the stainless steel pressure meter are analyzed.It is characteristic of stress corrosion cracking and inter granular fracture. 分析了不锈钢压力表管接头焊缝开裂的原因，认为此种开裂具有应力腐蚀开裂、沿晶断裂特征。
- The paper analyzed the welding characteristic of stainless steel clad plate, and summarized three factors that were welding groove, welding materials and parameter, welding sequence. 对不锈钢复合钢板的焊接特点进行了理论分析,总结出其焊接三要素:焊接坡口、焊接材料和参数、焊接顺序。
- Through the analysis of material and construction, the dissimilar steel gear is successfully welded using stress reduction zone by heating and proper assemble and welding sequence. 通过对铸焊齿轮的材料和结构的分析;利用“加热减应区”法及适当的装配焊接顺序;成功地焊接了异种金属的合金钢齿轮.
- on-site anti-corrosion joint welding of pipeline 管道防腐现场补口
- The results show that the perfect joint welded is obtained by choosing suitable welding condition to meet requirement of Aspect;smoothness;nugget dimension and mechanical properties. 结果表明:选用中等偏硬一些的焊接规范,可以获得较理想的点焊接头,接头的外观、平滑度及熔核尺寸和力学性能满足了相关标准的要求;
- Study on the welding sequence of automobile bodywork 汽车车身装焊顺序规划研究
- The delays put the whole schedule out of joint. 一再的拖延打乱了全部安排。
- Joint welding of clad steels; design and performance 复合钢的连接焊;设计和结构
- Tube Joint Welding Process of Maleic Anhydride Reactor 顺酐反应器管接头焊接工艺
- EFFECT OF WELDING SEQUENCE ON WELDING STRESS OF FRANCIS TURBINE RUNNER 焊接顺序对混流式水轮机转轮焊接应力的影响
- She fell and put her knee out of joint. 她摔得膝关节脱臼了。
- Interface bonding strength of clad transition joints welded in two different welding procedures is compared and a proper welding procedure is determined. 对两组不同焊接规范下复合过渡接头的界面结合强度进行了对比，确定了合适的焊接工艺参数。
- The doctor put his bone into the joint again. 医生使他的骨头复位。
- Take a seat, have a cigarette or a joint and I will be back in three minutes. 请坐，抽根香烟或大麻烟，我三分钟内就回来。
