您要查找的是不是：
- The different influences on tangent bulk modulus of conventional triaxial test and isotropic compression test were considered. 考虑了常规三轴试验和各向同性压缩试验对切线体积模量的影响。
- isotropic compression tests 等向压缩试验
- SOILS: INVESTIGATION AND TESTING. STATIC COMPRESSION TEST ON SINGLE PILE. 土壤。检验与试验。
- Friction coefficient between coated dies and metal samples can be determined by compression tests of ring samples. 使用环形试样压缩试验,可测出涂层模具和相应金属试样间的摩擦因数。
- The long-term cyclic loading protocol of this inestigation differs from the usual compression tests. 在这一研究中的长期循环负荷方案不同于通常的压缩试验。
- The mechanical behavior of 7A04 alloy in the semisolid state has been studied through isothermal compression tests. 通过半固态等温压缩实验,研究了7A04合金在半固态压缩过程中的力学行为。
- The buckling in static and dynamic compression tests is in inelastic region, it is plastic buckling. 静态以及动态下之挫曲皆已进入非弹性范围，属于塑性挫曲。
- Based on stress control triaxial compression test and consolidation test, the indeterminacy of test result for rockfill was studied. 摘要依据堆石料压缩试验和应力式三轴试验成果，对堆石料力学试验中的不确定性进行了论述。
- Quasi-static axial compression tests are carried out to study the crushing behaviors of the aluminum foam filled hat sections. 通过试验方法研究了泡沫铝填充帽型结构准静态压溃时的吸能特性。
- The experimental results show that the present designs of VBR can easily pass through compression tests without fracture. 实验结果显示设计出腰椎替代物能轻易的通过压力测试而无破害的产生。
- Creep property of undisturbed and reconstituted Japanese clay was presented based on drained triaxial compression tests. 摘要研究了黏土的未扰动和重塑土样在三轴排水剪切试验条件下的蠕变特性。
- The torsion, three-point bending and compression tests were respectively made on femurs and 5th lumbar vertebrae of three groups after 3 months. 3个月后取股骨和第5腰椎进行股骨干的扭转、三点弯曲和腰椎的压缩试验。
- According to the compression test of two warp fleece fabrics, the influence of the PTT fiber on the warp knitting fleece performance was analyzed. 简单介绍了PTT纤维的性能,并对PTT经编拉绒织物的抗倒伏性能测试方法及倒伏机理进行了探讨。
- In this paper,the unconfined uniaxial compression tests on backfills with different cement-tailings ratio in the special large-sized stope in Anqing copper mine are presented. 对安庆铜矿特大型采场不同灰砂配比的充填体进行了无侧限单轴抗压试验,根据试验测得的单轴压缩韧度参数,了解了胶结充填体的韧性性能。
- Contrast with triaxial compression test result, it shows that this model correctly reflects the relation of stress-strain. 通过与砂岩试件三轴压缩试验实测结果对比，证明模型可以很好地反映岩石的应力-应变关系。
- The relation between dilatancy strain ratio and shear stress ratio can be described by a linear relation which is also verified by tri-axial compression tests. 固结围压越大，剪缩剪胀临界点的应力比越大，含水率越大，剪缩剪胀临界点的应力比越小。
- Through the unconfined compression test and triaxial rigidity test without drain, the authors studied the properties and influence of different formula for the clay-cement grout. 通过对不同配比的粘土-水泥浆液结石体的室内无侧限抗压强度试验以及三轴固结不排水试验,揭示了各因素对粘土-水泥浆液结石体性质的影响。
- The theoretical predictions are compared with triaxial drained and undrained compression test results of a marine soft soil;it is shown that the model is reasonable. 将理论预测与某海洋软土三轴排水与不排水剪切试验结果比较，显示了该模型的合理性。
- The flow stress of 7A60 ultra high strength aluminum alloy was studied by isothermal compress test at constant strain rate. 采用等温恒应变速率压缩试验对7A60超高强度铝合金的流动应力进行了研究。
- Due to the characteristics of GEC, which lies in its ability to double capacity of every group, it can compress test data efficiently. 组扩展码将每组的容量扩大了一倍，能有效压缩芯片测试数据量。
