您要查找的是不是:
- iron loss factor 铁损系数,铁耗系数
- For photoflash, lug type, low loss factor and low leakage current. 闪光灯用焊片式产品,具有低损耗,低漏电等特点。
- For phlto-flash, Lug type, Low loss factor and low leakage current. 闪光灯用焊片式产品,具有低损耗等特点。
- For photoflash,lead wire type,small size,Low loss factor,high stability. 闪光灯用引线式产品,体积小,损耗小,性能稳定。
- The generator loss is composed of iron loss, bearing friction loss, bushing friction loss and windage loss. 发电机损失由铁阻、轴承摩擦损失、套管摩擦损失和风阻组成。
- Iron loss is a important source of performance deterioration for high-speed control in field oriented induction motor. 摘要在电机的磁场定向控制中,铁损是导致高速性能畸变的一个重要原因。
- For photoflash, lug type, small size, low loss factor, low leakage, high stability. 闪光灯用焊片式产品,体积小,漏电流小,性能稳定。
- The subsurface oxide layers generated stresses in the sheet and impeded domain wall motion,so that the iron loss was increased. 这种氧化层使钢板产生应力场,阻碍磁畴壁的位移,因而使铁损增加。
- No-load current from magnetizing current (flux generated) and the iron loss currents (caused by iron core loss) component. 空载电流由磁化电流(产生磁通)和铁损电流(由铁芯损耗引起)组成。
- Because of the repeated load the scaled mass and loss factor of the dynamic modulus of elasticity after the deicer-frost g... 由于重复荷载的作用,混凝土的盐冻剥蚀量和相对动弹性模量损失率显著提高,道路混凝土抗盐冻性能明显下降。
- Provided with high saturation magnetic displacement, lower iron loss and coercive force, and better soft magnetic performance in comparison with common electrical sheet. 具有高饱和磁感应强度,较低的铁损和矫顽力,与常用的电工钢相比具有更好的软磁性能。
- Metal Oxide Arrester (MOA) plays a very important role in power system, and the dielectric loss factor is an important parameter to reflect the insulation condition. 氧化锌避雷器(MOA)在电力系统中占有相当大的比例,而氧化锌避雷器阀片的介质损耗因数是反映其绝缘状况的重要参数。
- The experimental results show that the loss factor and damp ratio decrease,the resonance frequency increases with increase of the aperture of the piston in the damper. 对阻尼器不同孔径进行了对比试验,试验结果表明:随着活塞孔径的增大,阻尼器的损耗因子和阻尼比减小,共振频率增加。
- Magnetic properties (including lower iron loss and higher magnetic flux) of non-oriented electric steel can be obtained effectively through controlling slab heating, rolling and coiling temperatures. 通过对大生产中大量实验的分析,就热轧工序温度制度对无取向电工钢电磁性能的影响情况进行了比较详细的阐述。
- Engineering measurement method of loss factor is developed according to propagation and decreasing rules of velocity response of infinite plate,and extended to all edges simply-support(SSSS) plate. 通过研究无限板上速度响应的传播衰减规律,发展了一种测试损耗因子的工程方法,并将其推广到周边简支板结构。
- Properties of the solids are obtained by extrapolating functions of the dielectric constant and loss factor that are linearly related to the bulk density of the air particle mixture. 当已知待测材料的“固体密度”时,利用这些测得特性与混合物“松密度”的线性函数关系进行“外推”,从而获得“固体密度”下的农产品(或矿物)的微波介电特性。
- Application : This machine is designed for power capacitors' AC high voltage testing between terminal and terminal, terminal and carapace, and capacitance loss factor testing between terminals. 产品包装:用于电力电容器成品极间交流耐压测试、极壳间交流耐压测试和极间容量损耗测试。
- Chen Tianxiang,Duan Jiandong,Zhang Baohui,et al.New emendatory FFT algorithm of measuring dielectric loss factor tan 6[J].Automation of Electric Power Systems,2005,29(15):58-62(in Chinese). [6]陈天翔;段建东;张保会;等.;用傅里叶变换测量介质损耗因数tan 6软件同步算法[J]
- Napoleon conquered by the force of an iron will. 拿破仑攻无不克靠的是坚强的意志。
- It will take weeks to get all the wrinkle iron out. 解决这些难题得要几周时间。