您要查找的是不是:
- internal stress measurement 内应力测量
- Internal stress is one of the most important kinds of stress to deal with. 内心的压力是需要对付的最重要的压力之一。
- The machine is made from steel.It's vibration treated roil to reduce internal stress. 本机械为钢板结构,经振动时效消除内应力。
- Mr. TAM was commended for his work relating to the development of the Heat Stress Measurement System. 谭先生研制暑热压力测量系统的工作及成果,获得嘉奖。
- The residual stress of the heryllium ring weldment was studied by FEM simulation and X-ray stress measurement. 采用有限元分析法和X射线应力测试法对铍环形焊件的残余应力分布规律进行了研究。
- Safety performance is good, have even internal stress, broken hind show meshy flaw. 安全性能好,有均匀的内应力,破碎后呈网状裂纹。
- Based on in-situ stress measurement,the geological tectonism of Sanshandao Gold Mine is analyzed in detail. 结合现场地应力测量,对三山岛金矿区地质构造进行了细致分析。
- The internal stress of the joined materials was only several MPa according to the result of calculation. 应力计算结果得出焊接件中只有数兆帕的拉应力。
- Strain gage hole drilling method is one of the most popular residual stress measurement methods. 应变片钻孔法是工程中应用最广的残余应力测量方法之一。
- The machine is all made from steel.It's vibration treated roil to reduce internal stress to make machine stronger. 全钢板焊接框架结构,振动时效消除内应力,机械强度高,刚性好。
- Design of the software for RMS stress measuring instrument. RMS应力测量仪器定点监测及室内调试软件的设计
- The machine is made from all steel, vibration treated roil to reduce internal stress. 结构为全钢焊接结构,经振动时效处理。
- The internal stress of electrodeposit is one of the important factors of affecting electroplatingQuality. 电镀层内应力是影响电镀层质量的重要因素之一。
- Its comprehensive coverage focuses on flaw detection, inspection, stress measurement, development of testing equipment and sensors, and data analysis. 它的广泛报导集中在探伤、检查、应力测量、试验设备、传感器和数据分析的发展。
- The effect of pulse current parameters on the internal stress of electroformed layer is discussed based on the test. 通过试验,讨论了脉冲电流电参数对镍铸层内应力的影响;
- In this paper, the principle, method and results of the earth stress measurement by hollow inclusion gauge at Renlou Coal Mine are introduced. 本文介绍了空心包体应力解除法的基本原理和方法,并利用其对任楼煤矿地应力进行了测量。
- Abstract: Rock stress state in situ is determined by the hydrofracturing method for rock stress measurement in a railway tunnel in northwestern Yunnan. 摘 要: 通过地应力测量,确定出工程区隧道围岩现今地壳应力状态,即原地应力的大小和方向。
- The fracture analysis was made by means of microstructure, macrostructure, SEM, chemical composition, stress measurement and calculation. 采用宏、微观、扫描电镜、化学分析、应力测定及计算等方法对断裂螺母进行了分析。
- All steel-welded construction, integrated treatment(vibration effect, heat) to eliminate internal stress, high rigidity and good reliability. 全钢焊接结构,综合处理(振动时效、热)消除内应力,有很好的刚性与稳定性。
- The effect of additives on hydrogen content and internal stress of palladiumelectrodeposits was studied by electrochemical method. 采用电化学方法研究了添加剂对把电沉积层氢含量和内应力的影响。