您要查找的是不是:
- STRENGTH CRITERION AND INTERNAL FRICTION COEFFICIENT OF ROCK SPECIMEN 岩石试样的强度准则及内摩擦系数
- internal friction coefficient 内摩擦系数
- The thickening of zone prevention can be realized by shorting the initial length of feeding zone, decreasing the friction coefficient and choosing low internal pressure. 因此保证内高压成形得到的变径管送料区壁厚增加不明显的措施是:尽量减小送料区初始长度、减少摩擦,选择较低的成形内压。
- Internal friction coefficients deduced from the law of Maxwell distribution of velocities and distribution of mean-free path 由麦克斯韦速率分布和自由程分布导出内摩擦系数
- All internal friction harmful to the War of Resistance must be sternly checked. 任何不利于抗战的内部磨擦,都必须用严正的态度加以制止。
- The low density graphite gets higher friction coefficient and bulk worn loss than the high density graphite. 低密度石墨的摩擦系数和体积磨损量比高密度石墨材料高。
- The friction coefficient of the polish surface was 74% of that of grind surface. 摩擦表面抛光处理,使摩擦因数降低为磨削处理时的74%25。
- A granular materical designed for maximum stability should pocess high internal friction to resist deformation under load. 为得到最大的稳定性而设计的颗粒材料应具有高内摩擦力而抵抗荷载下的变形。
- The experimental results show that EDL has apparent effect on the friction coefficient and streaming potential. 结果表明,外加电场作用下,双电层电粘度效应对摩擦因数具有明显影响;
- The friction coefficient increases with the increase of amplitude, and decreases with the increase of load. 镀层摩擦因数随微动振幅增加而增加,随载荷的增加而减小;
- The down side to this is that engines of greater displacement have larger internal friction surfaces inside and that robs power. 这的向下边是更大的替代的那发动机有更大的内摩擦在里面的表面和那抢劫能力。
- Dry hair and oiliness hair had little difference on the average friction coefficient. 干性头发和油性头发的摩擦系数相差不大;
- The friction coefficient of sample with high porosity tended to reduce and stabilize in continuous braking cycles. 在连续循环制动时,高孔隙率材料的摩擦系数逐渐降低并趋于稳定。
- coefficient of internal friction 内摩擦系数
- Friction coefficient between coated dies and metal samples can be determined by compression tests of ring samples. 使用环形试样压缩试验,可测出涂层模具和相应金属试样间的摩擦因数。
- A granular material designed for maximum stability should possess high internal friction to resist deformation under load. 为得到最大的稳定性而设计的颗粒材料应具有高内摩擦力而抵抗荷载下的变形。
- Experimental results show that POB reduces the friction coefficient and increases the wear resistance of PTFE. 结果表明,添加POB降低了PTFE的摩擦系数,提高了PTFE的耐磨性。
- The viscoelasticity-anelasticity transition in the Zn-Al eutectoid alloy is investigated by measuring the internal friction(IF). 摘要文章通过内耗的测量研究了锌铝共析合金中黏弹性-滞弹性的转变;
- Lubricating status between surfaces is charaterized with Coulomb friction coefficient. 其中表面间的润滑状态是通过库仑摩擦系数来表征的。
- Using Boltzmann superposition principle, an universal formula of internal friction was also derived, which was verified by experimental date. 再利用波耳兹曼迭加原理,得出普适的磁弹性内耗公式,此公式得到实验数据的证实。