您要查找的是不是：
- When mixing the MDI and PF,adding the MDI first has higher IB (internal bond strength) and TS(thickness swelling of the board) than adding the UF first. 按照不同的施胶顺序将异氰酸酯与不同的酚醛胶混合。 结果表明：先施加异氰酸酯再施加PF与先施加PF再施加异氰酸酯相比，板材的内结合强度和厚度膨胀率好；
- Effect of Laccase Treating Conditions on Internal Bond Strength of Liquidambar formasana Fiberboard 漆酶处理条件对枫香湿法纤维板强度的影响
- Effects of Horizontal Density Distribution on Internal Bond Strength of Particleboard 平面密度分布对刨花板内结合强度的影响
- Keywords laccase;liquidambar formasana;fiberboard;treatment conditions;internal bond strength; 漆酶;枫香;纤维板;处理条件;内结合强度;
- Keywords Phenol formaldehyde resin;Kenaf felt board;Internal bond strength;Thickness swelling rate of water; 酚醛树脂;麻毡板;内结合强度;吸水厚度膨胀率;
- internal bond strength 内部结合力
- could improve the thickness swelling and water absorption of GPB, and also improve the internal bond strength( IB), modulus of rupture( MOR) and modulus of elasticity( MOE) of GPB. 研究表明,添加适量的有机硅防水剂能提高石膏刨花板的防水性能,并对板的内结合强度、曲强度和弹性模量有一定的改进。
- Bond strength is an important parameter for wafer bond. 键合强度是关系到键合好坏的一个重要参数。
- The bond strength experiment of dogtooth exposed to pulsed Nd: YAG laser[J]. 引用该论文 朱建中;黄炜;许肖杰;林斌;陈钰清;顾锡荣.
- Xeno III Adhesive provides bond strength comparable to total etch systems. 异种三胶粘剂粘结强度可比提供总额蚀刻系统。
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied. 同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨。
- internal bonding strength 内部结合力
- Bond strength between tooth and base bracket with two bracket base designs: An in vitro comparative study. 两种底板托槽体外粘结强度的对比研究。
- The shear bond strength of titanium and its alloys with SOLIDEX veneering resin. 钛钛合金牙粘结复合树脂。
- Crossbands shall be edge-glued or one piece wood or high performance composite product with an internal bond of atleast 200 psi (ASTM D 1037), without voids or show-through(telegraphing). [[交叉板，木制品行业用语，在制作木门中采用的板材，目的是增强门页的强度。美国的AWI标准中有规范。
- The bond strength of Ni-P coating on Mg alloy AZ91D is studied with metalloscope,SEM,EDS. 利用金相显微镜、SEM、能谱仪(EDS),研究了镁合金AZ91D的化学镀Ni-P的结合强度。
- It can be concluded that the bond strength of Tyrian/One-Step Plus has a comparable high value under microtensile test. Tyrian/One-StepPlus黏结系统的黏结性能最好。
- Insulating ability and peel bond strength are two important properties for thermal insulating covering. 保温性能和剥离强力是保温被两个非常重要的性能指标。
- Brian M.Lucey,James Steeley.Measuring and assessing the effects and extent of international bond market integration. 王丽娟;王影;周丽.;政府行为对中国企业债券市场影响分析[J]
- 今日热词
-
- 深远海浮式风电平台 - deep-sea floating wind power platform
-
- 京雄高速公路 - Beijing-Xiongan expressway
-
- 农业及相关产业增加值 - the added value of agriculture and related industries
