您要查找的是不是：
- intermeshing pressure angle 啮合压力角
- Generally, standard gear hobs are only used to machine gears with the same modul, pressure angle as hobs themselves. 在一般条件下，标准齿轮滚刀只能加工与其模数、压力角相同的同制齿轮。
- Furthermore, the models for the analyses, such as pressure angle, curvature, kinetostatics, and input torque, of the mechanism are built. 且建立该凸轮机构之各项特性分析的数学模式，包括压力角分析、曲率分析、运动静力分析，及推导系统输入扭矩表示式。
- This paper deals with measuring the diameter of addendum circle for a involute spur cylindrical gear and calculating and determining its mode number and pressure angle. 本文阐述了渐开线直齿圆柱齿轮齿顶圆直径的测量与齿轮模数、变位系数、压力角等参数的确定方法和步骤.
- It is confirmed that the sinusoidal gear can be easily undercut with a specific addendum height value decided only by the design pressure angle of the gear. 经讨论和仿真证实;正弦齿条所生成的齿轮在一个特定的齿顶高下最容易发生根切;该齿顶高数值只取决于正弦齿轮的设计压力角.
- With cylindrical coordination,this paper establishes the contour surface equations and pressure angle formula of the conical grooved cam with translating conical roller follower. 借助柱面坐标,建立了圆锥滚子直动从动件圆锥槽凸轮的廓面方程和压力角公式。
- In accordance with the characters of end section involute of helicoids,it is analyzed of change of the base circle affecting the pressure angle of involute profile. 依据渐开螺旋面端面渐开线的性质，分析了渐开线基圆变化对渐开线齿形压力角影响。
- Accordingly,the least teeth number without undercutting is also decided only by the design pressure angle of the gear,without any relation to the coefficient of addendum height of the gear. 相应的无根切最少齿数也仅取决于正弦齿轮的设计压力角;而与齿顶高系数值无关.
- It is indicated through the analysis of assistant steering mechanism of the farm transporter model FR1608 that within th e rang e of standard swinging of the pitman arm, the design rod structure satisfies the requirement of optimum pressure angle. 对FR1608运输车转向助力机构的分析结果表明，在转向器转向垂臂的标准摆动范围内，设计参数满足最佳压力角要求。
- The method and procedure of measuring and calculating involute spur gear geometrical parameters such as tip diameter, module, modification coefficient and pressure angle were shown in this paper. 本文阐述了渐开线直齿圆柱齿轮顶圆直径及齿轮模数、变位系数和压力角等参数的确定方法和步骤.
- The motorcycle V-belt continuously-variable transmission controlled by centrifugal ball is analyzed, and the method to obtain the pressure angle of the wimble surface on the moving disk is gained. 摘要通过对采用离心球控制的皮带传动的摩托车无级变速器的分析，得到了可以确定移动盘内锥面压力角的方法。
- In this paper, a method of employing standard hobs to machine gears with different module and pressure angle is presented.The relevant checking calculation method is also put forward. 本文提出用标准齿轮滚刀加工与其模数、压力角不同的异制齿轮的方法，并给出了相应的验算方法。
- This paper establishes the contour surface equation of a torus cam and presents a pressure angle formula, it provides a simple and efficient method for designing this kind of cams. 建立了环面凸轮轮廓曲面的解析方程，同时给出了压力角计算式，为此种凸轮的设计提供了一种简单有效的方法。
- By means of graphics and analytics this paper systematically discussed the methods of finding the pressure angles of disk cam with offseted, falt-faced, oscillated follower. 摘要运用图解法和解析法，系统地探讨了偏置平底摆动从动件盘状凸轮机构的压力角的求解。
- This article mainly studies the gearing characteristics of the asymmetric gear with two pressure angles and the method of analyzing it, s bending stress and contact stress. 本文主要研究了双压力角非对称齿轮的啮合特性及其齿根弯曲应力和接触应力的分析方法。
- The beer comes out of the barrel under pressure. 啤酒受到压力从桶中流出。
- Our pressure vessel is licensed product. 我厂生产的压力容器是授权生产产品。
- Loss of pressure had not registered on the dials. 刻度盘未记录压力下降。
- Air pressure forces the water through the pipe. 空气压力使水通过管道。
- The New Use of Cam Pressure Angle 探讨凸轮机构压力角的新用途
